Tired Of Dishwasher Wobbles? How To Replace Kitchenaid Dishwasher Wheels In 5 Easy Steps

Replacing KitchenAid dishwasher wheels may seem like a daunting task, but it’s actually a relatively straightforward process that can be completed in just a few steps. With the right tools and a little patience, you can have your dishwasher rolling smoothly again in no time.

Tools and Materials You’ll Need

Before you begin, gather the following tools and materials:

• New KitchenAid dishwasher wheels
• Screwdriver
• Pliers
• Adjustable wrench
• Bucket
• Old towels or rags

Step-by-Step Guide to Replacing KitchenAid Dishwasher Wheels

1. Unplug the Dishwasher and Turn Off the Water Supply

Safety first! Before you start working on your dishwasher, unplug it from the power outlet and turn off the water supply.

2. Remove the Dishwasher Door

Open the dishwasher door and locate the two screws that hold the door in place. Remove the screws and carefully lift the door off the hinges.

3. Tilt the Dishwasher Forward

With the door removed, carefully tilt the dishwasher forward. Be careful not to tip it too far, as you don’t want to damage the hoses or wires.

4. Remove the Bottom Panel

Locate the screws that hold the bottom panel in place. Remove the screws and carefully pull the panel off.

5. Locate the Dishwasher Wheels

Once the bottom panel is removed, you’ll be able to see the dishwasher wheels. They are typically located in the corners of the dishwasher.

6. Remove the Old Wheels

Using a screwdriver, remove the screws that hold the old wheels in place. Carefully pull the wheels off the axles.

7. Install the New Wheels

Align the new wheels with the axles and slide them into place. Secure the wheels with the screws.

8. Reattach the Bottom Panel

Once the new wheels are installed, reattach the bottom panel by sliding it into place and securing it with the screws.

9. Reinstall the Dishwasher Door

Lift the dishwasher door back onto the hinges and secure it with the screws.

10. Reconnect the Dishwasher

Plug the dishwasher back into the power outlet and turn on the water supply.

11. Test the Dishwasher

Run the dishwasher through a short cycle to make sure it’s working properly. Check for any leaks or unusual noises.

Troubleshooting Tips

If you encounter any problems while replacing your KitchenAid dishwasher wheels, here are a few troubleshooting tips:

• The wheels are not rolling smoothly: Make sure that the wheels are properly aligned and that there is no debris blocking them.
• The dishwasher is leaking: Check the hoses and connections for any leaks. Tighten any loose connections.
• The dishwasher is making a strange noise: Listen carefully to the noise and try to identify where it’s coming from. If you can’t find the source of the noise, call a qualified appliance repair technician.

Summary

Replacing KitchenAid dishwasher wheels is a simple task that can be completed in just a few steps. By following the instructions in this guide, you can have your dishwasher rolling smoothly again in no time.

Frequently Asked Questions

Q: How often should I replace my KitchenAid dishwasher wheels?

A: Dishwasher wheels should be replaced every 3-5 years, or more often if they are damaged or worn.

Q: Can I replace the dishwasher wheels myself?

A: Yes, you can replace the dishwasher wheels yourself with the right tools and a little patience.

Q: What are the symptoms of worn dishwasher wheels?

A: Worn dishwasher wheels can cause the dishwasher to wobble, make noise, or leak.