How To Reset The Pesky Kitchenaid Dishwasher Clean Light: A Simple Guide
What To Know
- To ensure the dishwasher is thoroughly cleaned, run a cycle with a dishwasher cleaner or vinegar.
- Resetting your KitchenAid dishwasher clean light is a simple process that can resolve a common issue and restore the unit to proper operation.
- The clean light flashes when the dishwasher needs cleaning or if there’s a fault in the system.
If your KitchenAid dishwasher’s clean light is flashing, it’s indicating that the unit requires cleaning. The flashing light can be caused by several factors, including food residue, mineral buildup, or a faulty sensor. Resetting the dishwasher can clear the flashing light and restore the unit to proper operation.
Step-by-Step Guide to Reset Dishwasher
1. Unplug the Dishwasher
Disconnect the dishwasher from the power outlet to prevent electrical shock.
2. Locate the Reset Button
The reset button is typically located on the control panel or inside the dishwasher door. Consult your dishwasher’s user manual for the exact location.
3. Press and Hold the Reset Button
Press and hold the reset button for approximately 5 seconds. The clean light should turn off.
4. Replug the Dishwasher
Plug the dishwasher back into the power outlet and turn on the water supply.
5. Run a Cleaning Cycle
To ensure the dishwasher is thoroughly cleaned, run a cycle with a dishwasher cleaner or vinegar.
6. Check the Clean Light
After the cleaning cycle is complete, check if the clean light is still flashing. If the light is still on, repeat the reset process.
7. Contact Customer Support
If the clean light continues to flash after multiple resets, contact KitchenAid customer support for further assistance.
Troubleshooting Common Causes
1. Food Residue
Clear any food residue from the filter, drain, and spray arms.
2. Mineral Buildup
Use a commercial dishwasher cleaner or vinegar to remove mineral buildup.
3. Faulty Sensor
If the dishwasher is still not cleaning properly, the water level sensor or other components may be faulty. Contact a qualified technician for repair.
Additional Tips
- Clean the dishwasher filter regularly to prevent clogging.
- Use a rinse aid to prevent water spots and improve drying.
- Avoid overloading the dishwasher with dishes.
- Run a cleaning cycle with vinegar every 3-6 months to maintain the dishwasher’s performance.
When to Call a Technician
If the clean light continues to flash after resetting and troubleshooting, it’s recommended to call a qualified technician. The technician can diagnose and repair any underlying issues with the dishwasher.
Final Thoughts
Resetting your KitchenAid dishwasher clean light is a simple process that can resolve a common issue and restore the unit to proper operation. By following the steps outlined above, you can easily clear the flashing light and ensure your dishwasher continues to clean your dishes effectively.
Frequently Discussed Topics
Q: Why is my KitchenAid dishwasher clean light flashing?
A: The clean light flashes when the dishwasher needs cleaning or if there’s a fault in the system.
Q: How do I clear the flashing clean light on my KitchenAid dishwasher?
A: Unplug the dishwasher, locate the reset button, press and hold it for 5 seconds, replug the dishwasher, and run a cleaning cycle.
Q: What should I do if the clean light continues to flash after resetting?
A: Contact KitchenAid customer support or a qualified technician for further assistance.