Step-by-step Guide: How To Fix A Faulty Dishwasher Control Board The Kitchenaid Way

When your KitchenAid dishwasher starts acting up, it can be a major inconvenience. One of the most common problems is a faulty control board. If you’re experiencing issues with your dishwasher’s buttons, lights, or cycles, it’s possible that the control board needs to be replaced. This blog post will provide you with a step-by-step guide on how to replace a KitchenAid dishwasher control board.

Tools and Materials You’ll Need

Before you start, gather the following tools and materials:

• New KitchenAid dishwasher control board
• Screwdriver set
• Multimeter (optional)
• Wire strippers (optional)
• Electrical tape (optional)

Safety Precautions

Before working on your dishwasher, it’s important to take the following safety precautions:

• Unplug the dishwasher from the power outlet.
• Turn off the water supply to the dishwasher.
• Wear safety glasses and gloves.

Step-by-Step Instructions

1. Remove the Dishwasher Door

• Open the dishwasher door and locate the two screws at the bottom of the door.
• Remove the screws and lift the door off the hinges.

2. Access the Control Board

• Locate the control board on the front of the dishwasher, behind the control panel.
• Remove the screws holding the control panel in place and lift it off.
• Disconnect the wires connecting the control panel to the control board.

3. Test the Control Board (Optional)

• If you have a multimeter, you can test the control board to confirm that it’s faulty.
• Use the multimeter to check for continuity between the terminals on the control board.
• If there is no continuity, the control board is likely faulty and needs to be replaced.

4. Disconnect the Wires

• Use a screwdriver to disconnect the wires connecting the control board to the dishwasher.
• Be careful not to damage the wires.

5. Remove the Control Board

• Remove the screws holding the control board in place.
• Lift the control board out of the dishwasher.

6. Install the New Control Board

• Place the new control board into the dishwasher.
• Secure the control board with the screws.

7. Reconnect the Wires

• Reconnect the wires to the new control board.
• Make sure the wires are securely connected.

8. Reinstall the Control Panel

• Place the control panel back on the dishwasher.
• Secure the control panel with the screws.

9. Reinstall the Dishwasher Door

• Lift the dishwasher door onto the hinges.
• Secure the door with the screws.

Tips for Success

• Take your time and follow the instructions carefully.
• If you’re not comfortable working on electrical appliances, consult a qualified technician.
• Make sure the new control board is compatible with your dishwasher model.
• If you have any questions or concerns, don’t hesitate to contact KitchenAid customer support.

Troubleshooting

If you’re experiencing problems after replacing the control board, try the following troubleshooting tips:

• Check the connections to make sure they are secure.
• Reset the dishwasher by turning off the power and then turning it back on.
• If the dishwasher still doesn’t work, contact KitchenAid customer support.

Signs of a Faulty KitchenAid Dishwasher Control Board

Here are some signs that may indicate a faulty KitchenAid dishwasher control board:

• The dishwasher buttons don’t work.
• The dishwasher lights don’t come on.
• The dishwasher cycles don’t start or finish.
• The dishwasher makes strange noises.
• The dishwasher leaks water.

In a nutshell

Replacing a KitchenAid dishwasher control board is a relatively straightforward repair that can be completed in a few hours. By following the instructions in this blog post, you can save yourself the cost of calling a technician and get your dishwasher back up and running in no time.

Popular Questions

Q: Can I replace the control board myself?

A: Yes, you can replace the control board yourself if you have basic electrical skills. However, if you’re not comfortable working on electrical appliances, it’s best to consult a qualified technician.

Q: How much does it cost to replace a KitchenAid dishwasher control board?

A: The cost of a new KitchenAid dishwasher control board can vary depending on the model. However, you can expect to pay between $100 and $200 for the part.

Q: How long does it take to replace a KitchenAid dishwasher control board?

A: Replacing a KitchenAid dishwasher control board typically takes between 1 and 2 hours. However, the time may vary depending on your skill level and the model of your dishwasher.