Master The Art: How To Level Side-by-side Refrigerator Doors Like A Pro
What To Know
- Adjust the front and back adjustment screws on the same side of the door to level it vertically.
- If the doors are too low, place a shim under the low side of the door to raise it.
- However, it is important to ensure that the level is placed on a flat surface at the bottom of the door.
Side-by-side refrigerators are a convenient and efficient addition to any kitchen. However, if the doors are not properly leveled, they can cause a variety of problems, including difficulty closing, uneven cooling, and excessive noise. In this blog post, we will provide a step-by-step guide on how to level side-by-side refrigerator doors, ensuring optimal performance and longevity.
Tools and Materials
Before you begin, gather the following tools and materials:
- Level
- Adjustable wrench
- Screwdriver
- Shim (optional)
Step 1: Unplug the Refrigerator
For safety reasons, always unplug the refrigerator before attempting any repairs or adjustments.
Step 2: Open the Doors
Open both refrigerator and freezer doors fully. This will allow you to access the adjustment screws.
Step 3: Locate the Adjustment Screws
The adjustment screws are typically located at the bottom of the refrigerator, near the hinges. There will be two screws on each side, one for the front and one for the back of the door.
Step 4: Level the Doors
Use a level to check the level of the doors. The doors should be level both horizontally and vertically. If the doors are not level, use the adjustable wrench to turn the adjustment screws accordingly.
- Horizontal Leveling: Tighten the adjustment screw on the low side of the door to raise it. Loosen the adjustment screw on the high side of the door to lower it.
- Vertical Leveling: Adjust the front and back adjustment screws on the same side of the door to level it vertically.
Step 5: Check the Alignment
Once the doors are level, close them and check their alignment. The doors should close evenly and without any gaps or overlaps. If the doors are not aligned, repeat step 4 until they are properly aligned.
Step 6: Tighten the Screws
Once the doors are level and aligned, tighten all of the adjustment screws securely using the screwdriver.
Step 7: Plug in the Refrigerator
Plug the refrigerator back in and turn it on. Allow it to run for a few minutes to ensure that the doors are functioning properly.
Troubleshooting
If you are having difficulty leveling the doors or if they are still not closing properly, try the following troubleshooting tips:
- Use a Shim: If the doors are too low, place a shim under the low side of the door to raise it.
- Check the Hinges: Ensure that the hinges are not loose or damaged. Tighten any loose screws or replace damaged hinges.
- Call a Repair Technician: If you are unable to level the doors yourself, contact a qualified repair technician for assistance.
Wrapping Up
Leveling side-by-side refrigerator doors is a relatively simple task that can be completed in a few minutes. By following the steps outlined in this guide, you can ensure that your refrigerator doors are functioning properly, providing optimal cooling performance and longevity.
Questions You May Have
Q: Why is it important to level refrigerator doors?
A: Leveling refrigerator doors ensures that they close properly, preventing uneven cooling, excessive noise, and potential damage to the unit.
Q: How often should I check the level of my refrigerator doors?
A: It is recommended to check the level of your refrigerator doors every few months or as needed, especially if you notice any changes in their performance.
Q: Can I use a regular level to level refrigerator doors?
A: Yes, a regular level can be used to check the horizontal level of refrigerator doors. However, it is important to ensure that the level is placed on a flat surface at the bottom of the door.
