How To Change Jenn Air Side By Side Refrigerator Water Filter

Maintaining a clean and efficient water filter is crucial for ensuring the quality and safety of your drinking water. If you own a Jenn-Air side-by-side refrigerator, changing the water filter is a straightforward task that can be completed in a few simple steps. Follow this comprehensive guide to learn how to change your Jenn-Air side-by-side refrigerator water filter effortlessly.

Tools and Materials

Before you begin, gather the following tools and materials:

• New Jenn-Air refrigerator water filter
• Screwdriver (if necessary)

Step-by-Step Instructions

1. Locate the Water Filter Housing

The water filter housing is typically located in the refrigerator compartment, near the top or bottom of the unit. It is usually a cylindrical or rectangular-shaped compartment with a cover.

2. Shut Off the Water Supply

Before handling the water filter, turn off the water supply to the refrigerator using the shut-off valve located behind the unit.

3. Open the Filter Housing Cover

Depending on your refrigerator model, you may need to remove screws or simply pry open the filter housing cover.

4. Remove the Old Water Filter

Once the housing cover is open, grab the old water filter and pull it straight down to detach it from the filter head.

5. Prepare the New Water Filter

Remove the new water filter from its packaging and discard the protective caps on both ends.

6. Insert the New Water Filter

Align the new water filter with the filter head and push it up firmly until it clicks into place.

7. Close the Filter Housing Cover

Secure the filter housing cover by pushing it back into place or tightening any screws removed earlier.

8. Turn On the Water Supply

Return to the shut-off valve behind the refrigerator and turn on the water supply.

9. Flush the Water System

Dispense water from the refrigerator dispenser for several minutes to flush out any air or impurities from the new filter.

Resetting the Filter Indicator (Optional)

Some Jenn-Air refrigerator models have a filter indicator that will illuminate when the filter needs to be replaced. To reset the indicator:

• Locate the filter reset button on the control panel.
• Press and hold the button for 3-5 seconds.
• The filter indicator should turn off.

Tips

• Change your Jenn-Air side-by-side refrigerator water filter every 6 months or as recommended by the manufacturer.
• If you notice a decrease in water flow or a change in the taste or odor of the water, it may be time to replace the filter.
• Some Jenn-Air refrigerator models have multiple water filters. Check your user manual to determine the number and location of filters in your unit.

Troubleshooting

• Water is leaking from the filter housing: Ensure that the filter is properly seated and the filter housing cover is securely closed.
• No water is dispensing from the dispenser: Verify that the water supply is turned on and that the water filter is not clogged.
• The filter indicator is not resetting: Check if the filter is compatible with your refrigerator model and if it is installed correctly.

Conclusion

Changing the water filter in your Jenn-Air side-by-side refrigerator is a simple and essential maintenance task that can be completed in a matter of minutes. By following these detailed instructions, you can ensure a continuous supply of clean and safe drinking water for your family.

Frequently Asked Questions

Q: How often should I change my Jenn-Air refrigerator water filter?
A: Every 6 months or as recommended by the manufacturer.

Q: What happens if I don’t change my water filter regularly?
A: A clogged or expired water filter can reduce water flow, affect water quality, and potentially cause damage to your refrigerator.

Q: Can I use an aftermarket water filter in my Jenn-Air refrigerator?
A: Yes, but it is recommended to use genuine Jenn-Air water filters to ensure optimal performance and compatibility.