The Mystery Of The Flashing Whirlpool Dishwasher: Unraveling The Clean Enigma
What To Know
- Run a diagnostics cycle or reset the dishwasher by unplugging it for a few minutes.
- Plug the dishwasher back in and select a wash cycle.
- Run a diagnostics cycle or listen for the pump running during a wash cycle.
A flashing “Clean” light on your Whirlpool dishwasher can be a source of frustration. Understanding the underlying cause is crucial for restoring your dishwasher to its optimal performance. This comprehensive guide will delve into the various reasons why your Whirlpool dishwasher may be flashing clean and provide practical solutions to resolve the issue.
Possible Causes and Troubleshooting
1. Clogged Filter
A clogged filter can prevent water from draining properly, causing the “Clean” light to flash. Remove the filter and clean it thoroughly under running water.
2. Blocked Drain Hose
Check for any kinks or clogs in the drain hose that may be obstructing water flow. Straighten the hose and remove any obstructions.
3. Faulty Drain Pump
If the drain pump is malfunctioning, it may not be able to pump out water effectively. Test the pump by running a diagnostics cycle or contacting a qualified technician.
4. Dirty or Faulty Water Inlet Valve
A dirty or faulty water inlet valve can restrict water flow into the dishwasher. Clean the valve or replace it if necessary.
5. Incorrect Water Pressure
Ensure that the water pressure to your dishwasher is within the recommended range (40-80 psi). If the pressure is too low, the dishwasher may not be able to fill properly.
6. Electronic Control Board Issue
The electronic control board manages the dishwasher’s functions. A malfunctioning board can cause the “Clean” light to flash. Reset the board by unplugging the dishwasher for 5-10 minutes.
7. Software Glitch
Occasionally, a software glitch can cause the dishwasher to display an incorrect status. Run a diagnostics cycle or reset the dishwasher by unplugging it for a few minutes.
Resetting the Dishwasher
If the above troubleshooting steps do not resolve the issue, try resetting the dishwasher:
1. Unplug the dishwasher for 5-10 minutes.
2. Press and hold the “Cancel” button for 5 seconds.
3. Plug the dishwasher back in and select a wash cycle.
Final Thoughts: Troubleshooting Success
By following these troubleshooting tips, you should be able to identify and resolve the cause of the flashing “Clean” light on your Whirlpool dishwasher. If the issue persists, consult a qualified appliance repair technician for further assistance. Remember, regular maintenance and cleaning can help prevent future problems and ensure the longevity of your dishwasher.
Questions You May Have
Q: Why does my Whirlpool dishwasher flash clean during a wash cycle?
A: This could indicate a clogged filter, blocked drain hose, or faulty drain pump.
Q: What does it mean when my Whirlpool dishwasher flashes clean after a wash cycle?
A: It usually means that the dishwasher has finished its cycle and the dishes are clean. However, if the light continues to flash, there may be an underlying issue.
Q: How do I clean the filter on my Whirlpool dishwasher?
A: Locate the filter at the bottom of the dishwasher and remove it. Rinse it thoroughly under running water and replace it securely.
Q: How do I test the drain pump on my Whirlpool dishwasher?
A: Run a diagnostics cycle or listen for the pump running during a wash cycle. If you don’t hear the pump running, it may be faulty.
Q: What is the recommended water pressure for a Whirlpool dishwasher?
A: The recommended water pressure range is 40-80 psi.
