Unveiled: the shocking truth why your kenmore washer won’t drain

A malfunctioning drainage system in your Kenmore washing machine can be a frustrating inconvenience. Understanding the potential causes and implementing effective solutions is crucial for resolving this issue. In this comprehensive guide, we will delve into the various reasons why your Kenmore washing machine may be experiencing drainage problems and provide detailed troubleshooting steps to restore its functionality.

Clogged Drain Hose

One of the most common reasons for a Kenmore washing machine not draining is a clogged drain hose. Lint, hair, and other debris can accumulate over time, obstructing the flow of water. To resolve this issue:

• Disconnect the drain hose from the washing machine and check for any visible blockages.
• Use a drain snake or a wet/dry vacuum to remove the clog.
• Run a hot water cycle with a cup of baking soda to clear any remaining residue.

Faulty Drain Pump

The drain pump is responsible for pumping water out of the washing machine. If it fails, the water will not drain properly. Here’s how to diagnose and fix a faulty drain pump:

• Listen for a humming noise during the drain cycle. A lack of noise indicates a potential pump problem.
• Check the electrical connections to the drain pump. Ensure they are secure and free of corrosion.
• If troubleshooting fails, you may need to replace the drain pump.

Malfunctioning Lid Switch

The lid switch prevents the washing machine from operating when the lid is open. If it malfunctions, the machine may not drain properly. To resolve this issue:

• Check if the lid is fully closed and the lid switch is engaged.
• Inspect the lid switch for any damage or loose connections.
• If necessary, replace the lid switch.

Obstructed Drain Filter

The drain filter collects debris and prevents it from entering the drain hose. If it becomes blocked, the water may not drain properly. To clean the drain filter:

• Locate the drain filter, usually at the front or bottom of the washing machine.
• Remove the filter and clean it using a brush or a wet cloth.
• Reinsert the filter securely.

Kinked Drain Hose

A kinked drain hose can restrict the flow of water, leading to drainage problems. To resolve this issue:

• Inspect the drain hose for any kinks or bends.
• Straighten out the hose and ensure it is not obstructed.
• Reattach the hose to the washing machine and the drainpipe.

Faulty Water Level Switch

The water level switch detects the water level in the washing machine and signals the drain pump to start when the water reaches a certain level. If it malfunctions, the water may not drain properly. To resolve this issue:

• Check if the water level switch is stuck or damaged.
• Clean the water level switch using a mild detergent and a soft brush.
• If troubleshooting fails, you may need to replace the water level switch.

Other Possible Causes

In addition to the above-mentioned causes, other factors that can contribute to drainage problems in a Kenmore washing machine include:

• A clogged drainpipe
• A faulty timer or control board
• A worn-out belt

Tips for Maintaining a Healthy Drainage System

To prevent drainage problems in the future, consider these tips:

• Clean the drain filter regularly.
• Avoid overloading the washing machine.
• Use a mesh bag to catch lint and hair.
• Run a hot water cycle with a cup of baking soda every few months to clean the drain hose and pump.

When to Call a Professional

If you have tried the troubleshooting steps outlined above and the drainage problem persists, it is advisable to contact a qualified appliance repair technician. They can diagnose the issue accurately and perform necessary repairs to restore the functionality of your Kenmore washing machine.

What You Need to Learn

1. Why does my Kenmore washing machine make a noise when it is draining?

A vibrating or humming noise during the drain cycle can indicate a clogged drain hose or a faulty drain pump.

2. How often should I clean the drain filter in my Kenmore washing machine?

It is recommended to clean the drain filter every few months or as needed to prevent clogs.

3. What is the average cost to replace a drain pump in a Kenmore washing machine?

The cost to replace a drain pump can vary depending on the model and the labor involved. Generally, it can range from $100 to $300.