Step-by-step Instructions: Start Your Whirlpool Dishwasher With Top Controls Like A Pro

Starting your Whirlpool dishwasher with top controls can be a breeze, but it’s essential to ensure you’re doing it correctly to avoid any potential issues. This comprehensive guide will walk you through the simple steps involved in starting your Whirlpool dishwasher with top controls.

1. Load the Dishwasher

Begin by loading your dirty dishes into the dishwasher. Ensure they’re securely placed to prevent any movement during the wash cycle.

2. Add Detergent

Locate the detergent dispenser and add the recommended amount of dishwashing detergent. Consult the dishwasher’s user manual for specific instructions on detergent type and dosage.

3. Add Rinse Aid (Optional)

If desired, add rinse aid to the designated dispenser. Rinse aid helps prevent water spots and improves drying performance.

4. Close the Dishwasher

Firmly close the dishwasher door to ensure a proper seal.

5. Select the Cycle

Use the top control panel to select the desired wash cycle. Refer to your dishwasher’s user manual for a detailed description of each cycle.

6. Start the Dishwasher

Press the “Start” button on the control panel to initiate the wash cycle. The dishwasher will begin filling with water and running the selected cycle.

7. Monitor the Dishwasher

Keep an eye on the dishwasher during the wash cycle. If you notice any unusual noises or leaks, stop the cycle and address the issue.

Troubleshooting Common Issues

Dishwasher Won’t Start

• Check if the door is properly closed.
• Ensure the power supply is connected.
• Reset the dishwasher by unplugging it for 10 minutes and plugging it back in.

Dishwasher Not Washing Dishes

• Verify that the water supply is connected and turned on.
• Check the filter and clean it if necessary.
• Ensure the selected cycle is appropriate for the type of dishes being washed.

Dishwasher Not Drying Dishes

• Check if the rinse aid dispenser is empty and refill it if needed.
• Ensure the dishwasher is properly vented.
• Try a different drying cycle or increase the temperature setting.

Dishwasher Leaking

• Inspect the door gasket for any tears or damage.
• Check the hoses for any leaks or cracks.
• Ensure the dishwasher is level and not tilted.

Advanced Features

Delay Start

Use the delay start feature to program the dishwasher to start at a later time, such as during off-peak hours when electricity rates may be lower.

Child Lock

Activate the child lock feature to prevent accidental changes to the dishwasher settings or opening of the door during the wash cycle.

Heated Dry

Select the heated dry option to enhance drying performance and reduce the need for manual drying.

Final Note

Starting your Whirlpool dishwasher with top controls is a simple and straightforward process. By following these steps, you can ensure your dishes are cleaned and dried efficiently. Remember to refer to your dishwasher’s user manual for specific instructions and troubleshooting tips.

Frequently Asked Questions

Q: How often should I clean the dishwasher filter?

A: The dishwasher filter should be cleaned every 1-2 months or as needed.

Q: Can I use any type of dishwashing detergent in my Whirlpool dishwasher?

A: Yes, you can use any automatic dishwashing detergent that is safe for dishwashers.

Q: What is the recommended rinse aid for my Whirlpool dishwasher?

A: Whirlpool recommends using Jet-Dry rinse aid for optimal drying performance.

Q: How do I reset my Whirlpool dishwasher?

A: Unplug the dishwasher for 10 minutes and then plug it back in to reset it.

Q: Why is my Whirlpool dishwasher making a strange noise?

A: Strange noises during the wash cycle can be caused by various factors, such as loose dishes, a worn pump, or a clogged filter.