How To Reset The Heating Element On A Whirlpool Dishwasher: A Simple Guide
What To Know
- The heating element is a crucial component in any dishwasher, responsible for heating the water used to clean the dishes.
- Run a short cycle on the dishwasher to verify that the heating element is functioning correctly.
- The heating element may be damaged, the dishwasher may not be properly connected to the power supply, or there may be a blockage in the water inlet valve or filter assembly.
Is your Whirlpool dishwasher failing to heat water, leaving your dishes unhygienically clean? Don’t despair! Resetting the heating element can often resolve this issue. Follow our comprehensive guide to learn how to reset whirlpool dishwasher heating element and restore your appliance’s functionality.
Identifying the Heating Element
The heating element is a crucial component in any dishwasher, responsible for heating the water used to clean the dishes. It is typically located at the bottom of the dishwasher tub, beneath the filter assembly.
Safety Precautions
Before attempting any repairs, ensure the dishwasher is disconnected from the power supply. Also, wear protective gloves to avoid any potential electrical shocks.
Step-by-Step Reset Instructions
1. Locate the Control Panel: Identify the control panel on the front of the dishwasher and locate the “Reset” or “Cancel” button.
2. Press and Hold the Reset Button: Press and hold the “Reset” button for approximately 5-10 seconds. Some models may require you to press and hold it for up to 30 seconds.
3. Release the Button: Once the reset cycle is complete, release the “Reset” button.
4. Check for Error Codes: The dishwasher may display an error code on the control panel. Note down the code and refer to the user manual for its meaning.
5. Reset Circuit Breaker or Fuse: If the dishwasher still fails to heat water, reset the circuit breaker or fuse associated with the appliance.
6. Test the Dishwasher: Run a short cycle on the dishwasher to verify that the heating element is functioning correctly.
Troubleshooting Common Issues
Dishwasher Not Heating Water
- Check the heating element for any visible damage or corrosion.
- Ensure the dishwasher is properly connected to the power supply.
- Inspect the water inlet valve for any blockages.
- Clean the filter assembly thoroughly.
Dishwasher Heating Water Excessively
- Adjust the temperature setting on the control panel.
- Check the thermostat for any malfunctions.
- Inspect the water temperature sensor for any irregularities.
Additional Tips
- If the heating element is damaged, it needs to be replaced. Contact a qualified appliance repair technician for assistance.
- Regularly clean the dishwasher filter to prevent blockages that can affect the heating element’s performance.
- Use a dishwasher cleaner periodically to remove limescale and other deposits that can interfere with the heating element’s efficiency.
Questions We Hear a Lot
Q: Why is my Whirlpool dishwasher not heating water?
A: The heating element may be damaged, the dishwasher may not be properly connected to the power supply, or there may be a blockage in the water inlet valve or filter assembly.
Q: Can I reset the Whirlpool dishwasher heating element myself?
A: Yes, you can reset the heating element by pressing and holding the “Reset” or “Cancel” button on the control panel for 5-10 seconds.
Q: How do I replace a damaged heating element?
A: Contact a qualified appliance repair technician for assistance with replacing a damaged heating element.
