Unlock the secret: how to effortlessly replace your whirlpool dryer door switch
What To Know
- If your Whirlpool dryer is not starting or the door light stays on even when the door is closed, it could be a sign that the door switch is faulty.
- Replacing the door switch on your Whirlpool dryer is a simple repair that you can do yourself with a few basic tools.
- If your Whirlpool dryer is not starting or the door light stays on even when the door is closed, it could be a sign that the door switch is faulty.
If your Whirlpool dryer is not starting or the door light stays on even when the door is closed, it could be a sign that the door switch is faulty. Replacing the door switch is a relatively simple repair that you can do yourself with a few basic tools.
Tools and Materials You’ll Need
- Phillips head screwdriver
- Flat head screwdriver
- New Whirlpool dryer door switch
- Wire strippers (optional)
Step-by-Step Instructions
1. Unplug the Dryer
Before you begin, unplug the dryer from the power outlet.
2. Remove the Back Panel
Using a Phillips head screwdriver, remove the screws that hold the back panel in place. Carefully lift the back panel off the dryer.
3. Locate the Door Switch
The door switch is located on the right side of the dryer, near the door latch. It is a small, black or white switch with two wires connected to it.
4. Disconnect the Wires
Use a flat head screwdriver to gently pry the wires off the door switch. Be careful not to damage the wires.
5. Remove the Old Door Switch
Using a Phillips head screwdriver, remove the screws that hold the old door switch in place. Lift the old door switch out of the dryer.
6. Install the New Door Switch
Place the new door switch in the same position as the old one. Secure it with the screws.
7. Connect the Wires
Connect the wires to the new door switch. Make sure that the wires are securely attached.
8. Reinstall the Back Panel
Place the back panel back on the dryer. Secure it with the screws.
9. Plug in the Dryer
Plug the dryer back into the power outlet.
Troubleshooting
If you are having trouble replacing the door switch, here are a few troubleshooting tips:
- Make sure that the new door switch is compatible with your Whirlpool dryer model.
- Check the wires to make sure that they are securely connected.
- If the dryer still does not start, there may be another problem. You may need to contact a qualified appliance repair technician.
Wrap-Up
Replacing the door switch on your Whirlpool dryer is a simple repair that you can do yourself with a few basic tools. By following these step-by-step instructions, you can save yourself the cost of a professional repair.
Popular Questions
Q: How can I tell if my Whirlpool dryer door switch is faulty?
A: If your Whirlpool dryer is not starting or the door light stays on even when the door is closed, it could be a sign that the door switch is faulty.
Q: How much does it cost to replace a Whirlpool dryer door switch?
A: The cost of a new Whirlpool dryer door switch is typically between $20 and $40.
Q: How long does it take to replace a Whirlpool dryer door switch?
A: Replacing a Whirlpool dryer door switch is a relatively simple repair that should take about 30 minutes to complete.