Step-by-step Guide: How To Replace An Lg Microwave Turntable Motor
What To Know
- Replacing the turntable motor in your LG microwave is a straightforward repair that can be completed in under an hour.
- No, it’s essential to use a replacement turntable motor specifically designed for your LG microwave model to ensure compatibility and proper fit.
- While it’s possible to attempt repairs on the old motor, it’s generally more cost-effective and reliable to replace it with a new one.
Does your LG microwave turntable refuse to spin, leaving your food unevenly heated and frustrating your cooking experience? Fret not! Replacing the turntable motor is a relatively simple task that can restore your microwave to its former glory. Follow our comprehensive step-by-step tutorial to get the job done effortlessly.
Tools and Materials You’ll Need
- Philips head screwdriver
- Replacement turntable motor for your LG microwave model
- Gloves (optional)
Safety First
Before you begin, ensure your microwave is unplugged from the power outlet. This vital safety precaution prevents accidental electrical shock.
Step 1: Remove the Turntable
Gently lift the glass turntable off the microwave base. Set it aside in a safe place.
Step 2: Locate the Turntable Motor
The turntable motor is typically located beneath the microwave’s floor. Look for a small, cylindrical device with wires attached to it.
Step 3: Disconnect the Motor Wires
Using your Philips head screwdriver, loosen the screws holding the motor wires in place. Carefully disconnect the wires from the motor.
Step 4: Remove the Motor Mounting Screws
Locate the screws securing the motor to the microwave base. Unscrew and remove these screws.
Step 5: Detach the Old Motor
Once the screws are removed, gently pull the old turntable motor straight up and out of the microwave.
Step 6: Install the New Motor
Align the new turntable motor with the mounting holes in the microwave base. Carefully insert the motor into place.
Step 7: Secure the Motor
Secure the new turntable motor by tightening the mounting screws.
Step 8: Reconnect the Motor Wires
Reconnecting the motor wires is crucial. Match the wires to their corresponding terminals on the motor. Tighten the screws to secure the connections.
Step 9: Reinstall the Turntable
Place the glass turntable back onto the microwave base. Make sure it fits snugly and spins freely.
Step 10: Test the Motor
Plug the microwave back into the power outlet. Turn it on and place a cup of water on the turntable. If the turntable spins smoothly and consistently, your repair is successful!
Troubleshooting Tips
- If the turntable still doesn’t spin, double-check the motor wire connections. Loose or incorrect connections can prevent the motor from functioning properly.
- If the motor hums but doesn’t spin, it may be faulty. Replace it with a new one.
- If you encounter any difficulties, consult the user manual for your LG microwave model or seek assistance from a qualified appliance repair technician.
Wrapping Up
Replacing the turntable motor in your LG microwave is a straightforward repair that can be completed in under an hour. By following the steps outlined in this guide, you can restore your microwave to its optimal performance and enjoy evenly heated meals once again.
Frequently Discussed Topics
Q1: Can I use a generic turntable motor for any LG microwave model?
A1: No, it’s essential to use a replacement turntable motor specifically designed for your LG microwave model to ensure compatibility and proper fit.
Q2: How often should I replace the turntable motor?
A2: The lifespan of a turntable motor varies depending on usage and maintenance. If you notice any issues with the turntable’s rotation, it’s recommended to replace the motor promptly.
Q3: Can I repair the old turntable motor instead of replacing it?
A3: While it’s possible to attempt repairs on the old motor, it’s generally more cost-effective and reliable to replace it with a new one.