Unlock The Secrets: How To Replace The Lg Dishwasher Heating Element With Ease

Replacing a dishwasher heating element is a common repair task that can extend the life of your appliance and ensure your dishes are thoroughly cleaned. If your LG dishwasher is not heating water properly, it may be time to replace the heating element. This guide will provide you with step-by-step instructions on how to replace the heating element in your LG dishwasher.

Tools and Materials You’ll Need

• Phillips head screwdriver
• Flathead screwdriver
• Multimeter
• New heating element
• Wire nuts
• Electrical tape

Safety Precautions

• Unplug the dishwasher from the power outlet before starting any work.
• Turn off the water supply to the dishwasher.
• Wear gloves to protect your hands from sharp edges.

Step-by-Step Instructions

1. Remove the Dishwasher Panel

• Locate the screws holding the dishwasher panel in place.
• Use a Phillips head screwdriver to remove the screws and set them aside.
• Carefully lift the panel off the dishwasher.

2. Locate the Heating Element

• Once the panel is removed, locate the heating element. It is usually located at the bottom of the dishwasher tub.
• The heating element is typically held in place by a bracket or screws.

3. Disconnect the Heating Element

• Use a flathead screwdriver to disconnect the wires from the heating element.
• Make sure to note which wire goes to which terminal on the heating element.

4. Test the Heating Element

• Use a multimeter to test the heating element for continuity.
• If the heating element does not have continuity, it needs to be replaced.

5. Remove the Heating Element

• Once the heating element is disconnected, use a Phillips head screwdriver to remove the screws or bracket holding it in place.
• Carefully lift the heating element out of the dishwasher tub.

6. Install the New Heating Element

• Place the new heating element in the dishwasher tub.
• Secure the heating element with the screws or bracket.
• Connect the wires to the heating element terminals, making sure to match the wires to the correct terminals.

7. Reassemble the Dishwasher

• Replace the dishwasher panel and secure it with the screws.
• Turn on the water supply to the dishwasher.
• Plug the dishwasher back into the power outlet.

Troubleshooting Tips

• If the dishwasher is still not heating water after replacing the heating element, check the following:
• The thermostat
• The control board
• The wiring

Maintenance Tips

• To prevent future problems with the heating element, follow these maintenance tips:
• Clean the dishwasher regularly to remove food particles and debris.
• Avoid using harsh detergents that can damage the heating element.
• Run the dishwasher on a hot cycle once a month to help prevent scale buildup.

Wrapping Up

Replacing a heating element in an LG dishwasher is a relatively simple repair that can be completed in about an hour. By following these step-by-step instructions, you can save money and keep your dishwasher running smoothly.

Frequently Discussed Topics

1. How do I know if my LG dishwasher heating element is faulty?

• The dishwasher is not heating water properly.
• The heating element does not have continuity when tested with a multimeter.
• The dishwasher is making a humming noise.

2. Can I replace the heating element myself?

• Yes, you can replace the heating element yourself if you have basic DIY skills.
• However, it is important to follow the safety precautions outlined in this guide.

3. How much does it cost to replace the heating element in an LG dishwasher?

• The cost of replacing the heating element in an LG dishwasher will vary depending on the model of dishwasher and the availability of parts.
• However, you can expect to pay between $50 and $150 for the parts and labor.