Solving The Mystery: Why Is My Whirlpool Dishwasher Clean Light Blinking?
What To Know
- If the latch is faulty, the dishwasher will not start or complete the cycle, and the clean light will blink.
- If the filter is clogged, it can restrict water flow and cause the dishwasher to malfunction, resulting in a blinking clean light.
- Electrical problems, such as a loose wire or a faulty power supply, can also cause the dishwasher to malfunction and result in a blinking clean light.
Finding the clean light on your Whirlpool dishwasher blinking can be a frustrating experience. But don’t worry, it’s usually not a major issue and can be easily resolved. In this blog post, we’ll explore the common reasons why the clean light blinks and provide step-by-step instructions on how to fix it.
Common Causes of Blinking Clean Light
- Faulty door latch: The door latch is responsible for keeping the dishwasher door securely closed during the wash cycle. If the latch is faulty, the dishwasher will not start or complete the cycle, and the clean light will blink.
- Clogged filter: The dishwasher filter traps food particles and debris to prevent them from clogging the drain. If the filter is clogged, it can restrict water flow and cause the dishwasher to malfunction, resulting in a blinking clean light.
- Malfunctioning control panel: The control panel is the brains of the dishwasher and controls all its functions. If the control panel is malfunctioning, it can send incorrect signals to the dishwasher, leading to a blinking clean light.
- Water supply issues: A lack of water supply can prevent the dishwasher from completing the wash cycle. This can be caused by a closed water valve, a clogged water inlet hose, or low water pressure.
- Drain problems: If the drain hose is clogged or kinked, water cannot drain from the dishwasher, which can cause the clean light to blink.
- Electrical issues: Electrical problems, such as a loose wire or a faulty power supply, can also cause the dishwasher to malfunction and result in a blinking clean light.
Troubleshooting and Fixes
1. Check the Door Latch
- Open and close the dishwasher door firmly.
- Inspect the door latch for any damage or obstructions.
- If the latch is damaged, replace it with a new one.
2. Clean the Filter
- Locate the dishwasher filter at the bottom of the dishwasher.
- Remove the filter and rinse it under running water to remove any debris.
- Replace the filter securely in its housing.
3. Inspect the Control Panel
- Check if any buttons on the control panel are stuck or unresponsive.
- If necessary, clean the control panel with a damp cloth.
- If the control panel is damaged, it may need to be replaced.
4. Check Water Supply
- Ensure that the water supply valve is open.
- Inspect the water inlet hose for any kinks or leaks.
- Check the water pressure by running the sink faucet nearby.
5. Inspect Drain Hose
- Locate the drain hose at the back of the dishwasher.
- Check if the hose is kinked or clogged.
- If necessary, clear any obstructions from the hose.
6. Check Electrical Connections
- Make sure that the dishwasher is properly plugged into a power outlet.
- Inspect the power cord for any damage.
- If necessary, have an electrician check the electrical connections.
Other Possible Causes
- Overloaded dishwasher: If the dishwasher is overloaded with dishes, it may not be able to clean them properly, resulting in a blinking clean light.
- Incorrect detergent: Using the wrong type of detergent or too much detergent can cause sudsing and malfunctioning of the dishwasher.
- Hard water: Hard water can cause mineral buildup in the dishwasher, which can affect its performance and lead to a blinking clean light.
Wrapping Up
If you’ve tried the above troubleshooting steps and the clean light is still blinking, it’s recommended to contact a qualified appliance repair technician. They can diagnose the exact cause of the problem and provide a professional solution.
Frequently Asked Questions
Q: Why is my Whirlpool dishwasher blinking and not washing dishes?
A: It could be due to a faulty door latch, clogged filter, malfunctioning control panel, water supply issues, drain problems, or electrical issues.
Q: How do I reset the clean light on my Whirlpool dishwasher?
A: Unplug the dishwasher for 30 seconds and then plug it back in. This should reset the light.
Q: What does the clean light blinking 6 times mean?
A: It usually indicates a communication error between the control panel and the dishwasher’s main control board.
