Ultimate guide how to replace an lg dryer belt without calling a technician
What To Know
- Replacing the belt is a relatively simple task that can be completed in under an hour.
- The belt is a thick rubber band that wraps around the drum and the motor pulley.
- If the belt is too loose, it will slip off the pulleys and the drum will not turn.
Is your LG dryer not tumbling properly? If so, it’s possible that the dryer belt has worn out or broken. Replacing the belt is a relatively simple task that can be completed in under an hour. In this comprehensive guide, we’ll walk you through the steps on how to replace an LG dryer belt, ensuring your appliance is back up and running like new.
Materials and Tools You’ll Need
- New dryer belt
- Screwdriver
- Pliers
- Flashlight
Safety Precautions
Before starting any repair work, be sure to unplug the dryer from the power outlet. Also, allow the dryer to cool down completely before handling any components.
Step-by-Step Instructions
1. Locate the Dryer Belt
Open the dryer door and locate the drum. The belt is a thick rubber band that wraps around the drum and the motor pulley.
2. Remove the Front Panel
Using a screwdriver, remove the screws that hold the front panel in place. Carefully lift the panel up and off the dryer.
3. Disconnect the Belt
Use a pair of pliers to loosen the tension on the belt. Slip the belt off the motor pulley and then off the drum.
4. Install the New Belt
Place the new belt around the motor pulley first. Then, stretch the belt over the drum, making sure it is seated properly in the grooves.
5. Tighten the Belt
Use the pliers to tighten the tension on the belt. The belt should be taut, but not too tight.
6. Reattach the Front Panel
Align the front panel with the dryer and carefully lower it into place. Secure the panel with the screws.
7. Test the Dryer
Plug the dryer back into the power outlet and turn it on. Check to make sure the drum is tumbling smoothly.
Troubleshooting Tips
Belt is Too Loose
If the belt is too loose, it will slip off the pulleys and the drum will not turn. Tighten the belt using the pliers.
Belt is Too Tight
If the belt is too tight, it will put excessive strain on the motor and bearings. Loosen the belt using the pliers.
Drum is Not Turning
If the drum is not turning, even after replacing the belt, there may be another issue with the dryer. Check the motor, belt tension, and drive pulley for any damage or obstructions.
Key Points: Rediscover the Joy of a Smooth-Running Dryer
Replacing the dryer belt is a simple yet effective way to restore your LG dryer to its former glory. By following these step-by-step instructions, you can save time and money while ensuring your appliance operates smoothly and efficiently for years to come.
Frequently Asked Questions
Q: How often should I replace the dryer belt?
A: The average lifespan of a dryer belt is 5-7 years. However, it may need to be replaced sooner if it becomes worn or damaged.
Q: Can I use a different type of belt than the one recommended by LG?
A: No, it is important to use the correct type of belt for your specific dryer model. Using an incorrect belt can damage the appliance.
Q: Is it safe to replace the dryer belt myself?
A: Yes, replacing the dryer belt is a relatively simple task that can be completed by most homeowners. However, if you are not comfortable working with electrical appliances, it is best to call a qualified technician.
