Revolutionize Your Microwave: How To Replace Your Frigidaire Turntable Motor Effortlessly
What To Know
- The turntable is responsible for evenly distributing heat to your food, so a malfunctioning motor can lead to uneven cooking or even burnt food.
- Fortunately, replacing the turntable motor is a relatively simple and inexpensive repair that you can do yourself with the right tools and instructions.
- Using a Phillips head screwdriver, remove the screws that hold the outer cover of the microwave in place.
When your Frigidaire microwave’s turntable stops rotating, it can be frustrating. The turntable is responsible for evenly distributing heat to your food, so a malfunctioning motor can lead to uneven cooking or even burnt food. Fortunately, replacing the turntable motor is a relatively simple and inexpensive repair that you can do yourself with the right tools and instructions.
Tools and Materials You’ll Need
Before you begin, gather the following tools and materials:
- Phillips head screwdriver
- Flathead screwdriver
- New turntable motor
- Replacement turntable (if necessary)
Safety Precautions
Before starting any work on your microwave, always unplug it from the electrical outlet. This will prevent any risk of electrical shock.
Step-by-Step Instructions
1. Remove the Cover
Using a Phillips head screwdriver, remove the screws that hold the outer cover of the microwave in place. Carefully lift the cover off and set it aside.
2. Locate the Turntable Motor
The turntable motor is usually located at the bottom of the microwave cavity. It’s a small, round device with a black or gray casing.
3. Disconnect the Motor
Using a flathead screwdriver, gently pry the electrical connector off the turntable motor.
4. Remove the Motor
Remove the screws that hold the turntable motor in place. Carefully lift the motor out of the microwave cavity.
5. Install the New Motor
Place the new turntable motor into the microwave cavity and secure it with the screws.
6. Reconnect the Motor
Plug the electrical connector back onto the turntable motor.
7. Replace the Cover
Place the outer cover back on the microwave and secure it with the screws.
Replacing the Turntable (Optional)
If the turntable is also damaged, you may need to replace it as well. To do this:
- Remove the turntable by lifting it straight up.
- Install the new turntable by placing it on the turntable motor shaft and pressing down until it snaps into place.
Troubleshooting
If the turntable still doesn’t rotate after replacing the motor, there may be another issue. Check the following:
- Make sure the turntable is properly seated on the motor shaft.
- Check the electrical connections to make sure they are secure.
- If the motor is still not working, it may be defective. Replace it with a new one.
The Bottom Line: Keep Your Microwave Running Smoothly
Replacing the turntable motor in your Frigidaire microwave is a straightforward repair that can save you time and money. By following these instructions carefully, you can ensure that your microwave is back up and running in no time.
Frequently Asked Questions
Q: How often should I replace the turntable motor?
A: The turntable motor should last for several years with proper use. However, if it starts to malfunction, it should be replaced.
Q: Can I use a different type of turntable motor?
A: It’s important to use the correct type of turntable motor for your specific microwave model. Using the wrong motor can damage the microwave.
Q: What are some signs that the turntable motor needs to be replaced?
A: Common signs include the turntable not rotating, uneven heating, or burnt food.
