How To Efficiently Drain A Samsung Dishwasher: A Comprehensive Tutorial
What To Know
- Once the drain filter is clean, check the drain hose that runs from the dishwasher to the sink or garbage disposal.
- After cleaning the drain filter and checking the drain hose, reset the dishwasher by pressing and holding the “Cancel”.
- Ensure the air gap, a small device installed in the sink to prevent water from siphoning back into the dishwasher, is not clogged.
A Samsung dishwasher is a modern marvel that simplifies kitchen cleanup. However, like any appliance, it can occasionally encounter glitches that require attention. One such issue is when water remains trapped inside the dishwasher after a wash cycle. If you’re facing this problem, it’s time to learn how to just drain Samsung dishwasher and restore its pristine functionality.
Step 1: Safety First
Before embarking on any troubleshooting, ensure your safety by unplugging the dishwasher from the power outlet and turning off the water supply.
Step 2: Locate the Drain Filter
Open the dishwasher door and remove the lower dishrack. At the bottom of the dishwasher, you’ll find the drain filter, typically covered by a round or square cap.
Step 3: Remove the Drain Filter
Carefully unscrew or unclip the drain filter cap. Be prepared for some water to spill out, so have a towel or shallow dish ready.
Step 4: Clean the Drain Filter
Inspect the drain filter for any debris, such as food particles or small objects. Rinse it thoroughly under running water to remove any blockages.
Step 5: Check the Drain Hose
Once the drain filter is clean, check the drain hose that runs from the dishwasher to the sink or garbage disposal. Ensure it’s not kinked or clogged.
Step 6: Reset the Dishwasher
After cleaning the drain filter and checking the drain hose, reset the dishwasher by pressing and holding the “Cancel” or “Reset” button for several seconds. This will clear any error codes and initiate a fresh cycle.
Step 7: Run a Drain Cycle
To drain the remaining water from the dishwasher, run a drain cycle without any dishes. Select the “Drain” or “Rinse Only” cycle and press “Start.”
Step 8: Reinstall the Drain Filter
Once the drain cycle is complete, reinstall the drain filter cap by screwing or clipping it back into place.
Troubleshooting Tips
If the dishwasher still has water after following these steps, consider the following troubleshooting tips:
- Check the air gap: Ensure the air gap, a small device installed in the sink to prevent water from siphoning back into the dishwasher, is not clogged.
- Inspect the drain pump: The drain pump, located at the bottom of the dishwasher, may be malfunctioning. Check for any blockages or obstructions.
- Reset the circuit breaker: If the dishwasher is not receiving power, reset the circuit breaker or fuse that supplies power to the appliance.
Wrapping Up: A Clean and Dry Dishwasher
By following these steps, you can effectively drain your Samsung dishwasher, leaving it clean and dry for its next wash cycle. Remember to regularly maintain your dishwasher by cleaning the drain filter and running a cleaning cycle to prevent future waterlogging issues.
What You Need to Know
1. Why is my Samsung dishwasher not draining?
Possible causes include a clogged drain filter, kinked drain hose, or malfunctioning drain pump.
2. Can I drain my Samsung dishwasher without a drain pump?
Yes, you can manually drain the dishwasher by removing the drain filter and allowing the water to flow out.
3. How often should I clean the drain filter in my Samsung dishwasher?
It’s recommended to clean the drain filter every 1-2 months to prevent blockages and ensure optimal drainage.
