Frustrated with your whirlpool washer? here’s why it’s stuck on sensing

If your Whirlpool washing machine has become stuck on the “sensing” cycle, you’re not alone. This common issue can be frustrating, but it’s often easy to resolve. In this comprehensive guide, we’ll explore the various reasons why your washing machine may be stuck on sensing and provide step-by-step instructions on how to troubleshoot and fix the problem.

Causes of Washing Machine Stuck on Sensing

• Faulty water inlet valve: The water inlet valve controls the flow of water into the washing machine. If the valve is faulty, it may not be able to open or close properly, preventing the machine from sensing the correct water level.
• Clogged water filter: The water filter traps debris and sediment from entering the washing machine. If the filter becomes clogged, it can restrict water flow and cause the machine to get stuck on sensing.
• Malfunctioning pressure switch: The pressure switch monitors the water level in the washing machine. If the switch is faulty, it may not be able to accurately detect the water level, causing the machine to remain in sensing mode.
• Blocked drain hose: The drain hose carries wastewater out of the washing machine. If the hose becomes blocked, it can prevent the machine from draining properly, which can trigger the sensing cycle.
• Electrical issues: Electrical problems, such as loose connections or a faulty control board, can also cause the washing machine to get stuck on sensing.

Troubleshooting Steps

1. Check the Water Inlet Valve

• Turn off the water supply to the washing machine.
• Disconnect the water hoses from the back of the machine.
• Remove the water inlet valve by unscrewing the bolts that hold it in place.
• Inspect the valve for any damage or debris.
• Clean the valve with a soft cloth or brush.
• Reinstall the valve and reconnect the water hoses.
• Turn on the water supply and check if the machine is still stuck on sensing.

2. Clean the Water Filter

• Locate the water filter at the bottom of the washing machine.
• Pull out the filter and remove any debris or sediment.
• Rinse the filter with clean water.
• Reinsert the filter into the washing machine.

3. Test the Pressure Switch

• Disconnect the pressure switch from the washing machine.
• Blow into the port of the pressure switch.
• You should hear a clicking sound if the switch is working properly.
• If the switch does not click, it may need to be replaced.

4. Clear the Drain Hose

• Disconnect the drain hose from the back of the washing machine.
• Check the drain hose for any kinks or blockages.
• Use a plumber’s snake or a long, thin object to clear any blockages.
• Reattach the drain hose to the washing machine.

5. Check Electrical Connections

• Unplug the washing machine from the power outlet.
• Inspect the electrical cord and connections for any damage or loose wires.
• Tighten any loose connections and replace any damaged cords.

6. Reset the Washing Machine

• Unplug the washing machine from the power outlet for at least 30 seconds.
• Plug the washing machine back in and start a new wash cycle.

7. Call for Professional Help

If none of the above steps resolve the issue, it’s recommended to contact a qualified appliance repair technician. They can diagnose the problem more accurately and make the necessary repairs.

Wrapping Up

Getting your Whirlpool washing machine unstuck from sensing can be a simple task with the right troubleshooting steps. By following the instructions outlined in this guide, you can identify the cause of the problem and resolve it effectively. If you encounter any difficulties or require further assistance, don’t hesitate to seek professional help from an appliance repair technician.

Basics You Wanted To Know

Q: Why does my Whirlpool washing machine keep saying “sensing”?
A: The “sensing” cycle indicates that the washing machine is detecting the weight of the clothes and adjusting the water level accordingly. If the machine remains stuck on sensing, it may be due to a faulty water inlet valve, clogged water filter, malfunctioning pressure switch, blocked drain hose, or electrical issues.

Q: How do I reset my Whirlpool washing machine?
A: To reset your Whirlpool washing machine, unplug it from the power outlet for at least 30 seconds. Then, plug the machine back in and start a new wash cycle.

Q: How do I know if my Whirlpool washing machine‘s water inlet valve is faulty?
A: If the water inlet valve is faulty, you may notice that the machine is not filling with water or is taking longer than usual to fill. You can also check the valve for any visible damage or debris.