Why Is My Dishwasher Clean Light Blinking? Here’s The Answer You’ve Been Looking For!
What To Know
- A blinking clean light on a dishwasher can be a frustrating issue, but it is often resolvable with a little troubleshooting.
- A blinking clean light after a cycle can indicate a problem with the door latch, filter, or control panel.
- A blinking clean light when the dishwasher doesn‘t start may indicate a water supply problem, a clogged drain hose, or a….
When your dishwasher’s clean light starts blinking, it can be frustrating and confusing. This guide will help you identify the potential causes and provide step-by-step solutions to fix the problem.
Potential Causes of Blinking Clean Light
- Faulty door latch: The door latch may not be properly closing, preventing the dishwasher from starting or completing its cycle.
- Clogged filter: A clogged filter can restrict water flow and cause the dishwasher to stop prematurely.
- Malfunctioning control panel: The control panel may be malfunctioning, causing the clean light to blink even when the dishwasher has finished its cycle.
- Water supply issues: Insufficient water pressure or a blocked water supply can prevent the dishwasher from filling properly.
- Drain hose problems: A kinked or blocked drain hose can prevent the dishwasher from draining water efficiently.
- Overloading: Overloading the dishwasher can prevent items from getting cleaned properly and can cause the clean light to blink.
- Power surge or outage: A recent power surge or outage may have reset the dishwasher’s control panel, causing the clean light to blink.
Troubleshooting Steps
1. Check the Door Latch
- Ensure that the dishwasher door is securely closed.
- Inspect the door latch for any damage or obstructions.
- If necessary, replace the door latch.
2. Clean the Filter
- Locate the dishwasher’s filter, typically at the bottom of the tub.
- Remove the filter and rinse it thoroughly under running water.
- Reinstall the filter securely.
3. Reset the Control Panel
- Unplug the dishwasher from the power outlet.
- Wait for a few minutes, then plug it back in.
- Press the “Start” button to reset the control panel.
4. Inspect the Water Supply
- Check the water supply lines for any leaks or kinks.
- Ensure that the water pressure is sufficient by running water from the kitchen faucet.
- If necessary, adjust the water supply valve to increase the pressure.
5. Clear the Drain Hose
- Disconnect the drain hose from the dishwasher.
- Use a wire or pipe cleaner to remove any clogs or obstructions.
- Reattach the drain hose securely.
6. Check for Overloading
- Remove any excess dishes or utensils from the dishwasher.
- Ensure that dishes are properly loaded and not blocking the water jets.
7. Power Cycle the Dishwasher
- Unplug the dishwasher from the power outlet.
- Wait for at least 30 minutes.
- Plug the dishwasher back in and start a new cycle.
Alternative Causes and Solutions
- Faulty heating element: A malfunctioning heating element can prevent the dishwasher from reaching the proper temperature, causing the clean light to blink.
- Leaking tub: A leaking tub can cause water to accumulate outside the dishwasher, triggering the clean light to blink.
- Water sensor failure: A faulty water sensor may indicate a water leak, even when there is none, causing the clean light to blink.
- Electronic control module (ECM) failure: The ECM is the brain of the dishwasher and can cause various problems, including a blinking clean light.
When to Call a Professional
If you have tried all the troubleshooting steps above and the clean light is still blinking, it may be time to call a professional appliance technician. They can diagnose and repair more complex issues, such as faulty heating elements, leaking tubs, or ECM failures.
Ending Notes: Troubleshooting a Blinking Clean Light
A blinking clean light on a dishwasher can be a frustrating issue, but it is often resolvable with a little troubleshooting. By following the steps outlined in this guide, you can identify the potential cause and take the necessary actions to fix the problem. If the issue persists, do not hesitate to contact a qualified appliance technician for assistance.
What You Need to Know
Q: Why is the clean light on my dishwasher blinking after it has finished a cycle?
A: A blinking clean light after a cycle can indicate a problem with the door latch, filter, or control panel. Resetting the control panel or replacing the door latch or filter may resolve the issue.
Q: What does it mean when the clean light blinks and the dishwasher doesn‘t start?
A: A blinking clean light when the dishwasher doesn‘t start may indicate a water supply problem, a clogged drain hose, or a faulty door latch. Check the water supply, clear the drain hose, and ensure the door is properly closed.
Q: Can I reset my dishwasher to stop the clean light from blinking?
A: Yes, you can reset your dishwasher by unplugging it from the power outlet for a few minutes and then plugging it back in. This can often resolve minor software glitches that may be causing the clean light to blink.
