Solved! the hidden reason why your lg washing machine’s timer misbehaves

If you’ve noticed your LG washing machine repeatedly adding time to its wash cycles, you’re not alone. This can be a frustrating issue, especially if you’re pressed for time. Understanding the reasons behind this quirk can help you troubleshoot and resolve the problem.

Causes of Extended Wash Cycles

1. Imbalance Detection:

LG washing machines are equipped with an imbalance detection system. If the machine detects an unbalanced load, it will pause the cycle and redistribute the laundry. This process can add time to the wash cycle.

2. Excessive Sudsing:

Using too much detergent or the wrong type of detergent can cause excessive sudsing. The machine may add time to the rinse cycle to remove the excess suds.

3. Water Temperature Issues:

If the water temperature is significantly different from the selected setting, the machine may add time to the wash cycle to adjust the temperature.

4. Lint Accumulation:

Lint can accumulate in the drain hose or pump, causing a blockage. This can slow down the draining process and add time to the wash cycle.

5. Faulty Sensors:

Sensors within the washing machine can malfunction, causing the machine to add extra time to the wash cycle.

6. Water Pressure Issues:

Low water pressure can slow down the filling process, adding time to the wash cycle.

7. Worn or Faulty Components:

Over time, certain components such as the belt or motor can wear out or become faulty. This can affect the wash cycle‘s timing.

Troubleshooting Tips

1. Check for Imbalance:

Ensure that the laundry is evenly distributed in the washing machine. If not, redistribute it and restart the cycle.

2. Use the Correct Detergent:

Use the recommended amount of HE (High-Efficiency) detergent and ensure it’s suitable for your machine.

3. Check Water Temperature:

Before starting a wash cycle, ensure that the water temperature is set correctly.

4. Clean the Drain Hose and Pump:

Periodically clean the drain hose and pump to remove any lint or blockages.

5. Reset the Washing Machine:

Unplug the washing machine for a few minutes, then plug it back in and restart the wash cycle. This may reset any faulty sensors.

6. Check Water Pressure:

Contact your water supplier to check if there’s a drop in water pressure.

7. Contact LG Support:

If the problem persists after trying the above steps, contact LG support for assistance. They can diagnose the issue and provide a solution.

Preventing Extended Wash Cycles

• Load the washing machine evenly.
• Use the recommended amount of detergent.
• Clean the drain hose and pump regularly.
• Check the water temperature before starting a wash cycle.
• Avoid overloading the washing machine.
• Ensure that the washing machine is level.

Final Thoughts: Reclaiming Control of Your Wash Cycles

Understanding the reasons why your LG washing machine keeps adding time can empower you to troubleshoot and resolve the issue. By following the tips outlined above, you can prevent extended wash cycles and ensure that your laundry gets done on time, every time.

What You Need to Know

Q: Why does my LG washing machine keep adding 10 minutes to the wash cycle?
A: This could be due to an imbalance in the load, excessive sudsing, or a faulty sensor.

Q: My LG washing machine keeps adding time to the rinse cycle. What’s wrong?
A: This could be due to excessive sudsing or a blockage in the drain hose or pump.

Q: How can I stop my LG washing machine from adding extra time to the wash cycle?
A: Check for imbalances, use the correct detergent, clean the drain hose and pump, and reset the washing machine. If the problem persists, contact LG support.