How To Keep Your Whirlpool Refrigerator Water Filter Working Like New

Replacing your Whirlpool refrigerator water filter is a breeze with our comprehensive guide. Whether you’re a seasoned pro or a novice, our step-by-step instructions will empower you to tackle this task with confidence.

Identifying Your Whirlpool Refrigerator Model

Before embarking on your water filter replacement journey, it’s crucial to identify your specific Whirlpool refrigerator model. This information can be found on the refrigerator’s data plate, typically located inside the refrigerator compartment or behind the crisper drawers. Once you have your model number, you can proceed to the next step.

Locating Your Refrigerator’s Water Filter

Whirlpool refrigerators typically house their water filters in one of two locations:

• Inside the Refrigerator Compartment: Look for a small, removable cover on the ceiling of the refrigerator compartment. The water filter will be located behind this cover.
• Behind the Refrigerator Grill: Some Whirlpool models have their water filters located behind the grill at the bottom of the refrigerator. To access the filter, simply remove the grill by pulling it straight out.

Step-by-Step Water Filter Replacement Instructions

1. Turn Off the Water Supply

Locate the water supply valve, usually found behind the refrigerator or under the sink. Turn the valve clockwise to shut off the water supply.

2. Remove the Old Water Filter

• Inside the Refrigerator Compartment: Grip the water filter and twist it counterclockwise to unlock it. Pull the filter straight down to remove it.
• Behind the Refrigerator Grill: Press the release button on the water filter and pull it straight out.

3. Prepare the New Water Filter

Remove the protective cap from the new water filter. Apply a small amount of food-grade lubricant to the O-rings on the new filter.

4. Insert the New Water Filter

• Inside the Refrigerator Compartment: Insert the new water filter into the housing and twist it clockwise to lock it in place.
• Behind the Refrigerator Grill: Align the new water filter with the housing and push it in until it clicks into place.

5. Reset the Water Filter Indicator

Many Whirlpool refrigerators have a water filter indicator light that needs to be reset after replacing the filter. Locate the reset button on the refrigerator’s control panel and press it for a few seconds to reset the indicator.

6. Turn On the Water Supply

Turn the water supply valve counterclockwise to restore water flow to the refrigerator.

7. Run Water Through the Dispenser

Dispense water from the refrigerator’s dispenser for several minutes to flush out any air or impurities from the system.

Troubleshooting Common Issues

1. Water Leaking from the Filter Housing

• Ensure that the new filter is properly seated and locked in place.
• Check the O-rings on the filter for damage or wear.
• If the leak persists, contact Whirlpool for assistance.

2. No Water Flow from the Dispenser

• Verify that the water supply valve is turned on.
• Make sure the new water filter is inserted correctly.
• If the issue persists, the water line may be clogged or frozen.

3. Water Has a Strange Taste or Odor

• Run water through the dispenser for several minutes to flush out any impurities.
• If the taste or odor persists, the water filter may be contaminated. Replace the filter and run water through the dispenser again.

Final Thoughts: The Path to Pure and Refreshing Water

Replacing your Whirlpool refrigerator water filter is a simple and rewarding task that ensures you and your family enjoy pure and refreshing water. By following our step-by-step guide, you can confidently maintain your refrigerator’s water filtration system and savor the benefits of clean, healthy water.

What People Want to Know

1. How often should I replace my Whirlpool refrigerator water filter?

Every 6 months or 300 gallons of water, whichever comes first.

2. What type of water filter do I need for my Whirlpool refrigerator?

Use the Whirlpool EveryDrop water filter specifically designed for your refrigerator model.

3. Can I use a generic water filter instead of a Whirlpool EveryDrop filter?

While generic filters may fit, they may not provide the same level of filtration and protection as Whirlpool EveryDrop filters.

4. Can I clean my Whirlpool refrigerator water filter instead of replacing it?

No, Whirlpool water filters are designed for one-time use and cannot be cleaned.

5. How long does it take to replace the water filter in my Whirlpool refrigerator?

Typically, it takes less than 10 minutes.