Dryer not heating? how to reset your whirlpool electric dryer in minutes

If your Whirlpool electric dryer is experiencing technical difficulties, resetting it can often resolve the issue. Here’s a comprehensive guide on how to reset your Whirlpool electric dryer and get it back to running smoothly.

Before You Start

Before attempting to reset your dryer, ensure that it is unplugged from the power outlet. This safety precaution prevents any electrical hazards during the resetting process.

Step-by-Step Reset Instructions

1. Locate the Reset Button:

Most Whirlpool electric dryers have a reset button located on the control panel. It is typically a small, recessed button labeled “Reset” or “Restart.”

2. Press and Hold the Reset Button:

Once you have located the reset button, press and hold it for approximately 5-10 seconds. You may hear a clicking sound or feel a slight vibration, indicating that the reset process has been initiated.

3. Release the Reset Button:

After holding the reset button for the specified time, release it. The dryer should now be reset.

4. Plug the Dryer Back In:

Once the dryer has been reset, plug it back into the power outlet.

5. Power On the Dryer:

Turn on the dryer and select a drying cycle. The dryer should now function normally.

Troubleshooting Tips

If resetting your dryer does not resolve the issue, consider the following troubleshooting tips:

• Check Circuit Breaker or Fuse: Ensure that the circuit breaker or fuse connected to the dryer has not tripped or blown.
• Inspect Power Cord: Examine the power cord for any damage or loose connections.
• Clean Lint Filter: A clogged lint filter can restrict airflow and cause overheating, leading to dryer malfunctions. Clean the lint filter thoroughly before running the dryer again.
• Check Vent System: A blocked or clogged vent system can also cause overheating and dryer problems. Inspect and clean the vent hose and outside vent opening for any obstructions.

When to Call a Professional

If you have followed the steps outlined above and your dryer is still not functioning properly, it is advisable to contact a qualified appliance repair technician. They can diagnose and repair any underlying issues that may require specialized expertise or replacement parts.

Additional Tips

• Regular Maintenance: To prevent future dryer issues, perform regular maintenance, such as cleaning the lint filter and inspecting the vent system.
• Energy Efficiency: Resetting your dryer can also help improve its energy efficiency by clearing any residual settings or errors that may have impacted its performance.
• Resetting for Sale or Moving: If you are selling or moving your dryer, resetting it to factory default settings is recommended to ensure optimal performance for the new user.

The Aftermath: What to Expect After Resetting

After resetting your Whirlpool electric dryer, you can expect the following:

• Cleared Error Codes: Any error codes or fault messages displayed on the control panel should be cleared.
• Default Settings: The dryer will revert to its default settings, such as temperature, drying time, and wrinkle prevention options.
• Improved Performance: Resetting can often resolve minor glitches or software issues that may have been affecting the dryer’s performance.

Frequently Asked Questions

1. How often should I reset my Whirlpool electric dryer?

Resetting your dryer is not a regular maintenance task. Only reset it if you encounter technical issues or when selling or moving the appliance.

2. Can resetting my dryer damage it?

No, resetting your dryer will not damage it. It is a safe and recommended troubleshooting step for resolving minor issues.

3. What if my dryer does not reset after following the steps?

If your dryer does not reset after following the instructions, check the circuit breaker or fuse, inspect the power cord, and clean the lint filter. If the issue persists, contact a qualified appliance repair technician.