Save big! learn the secrets of replacing your maytag washing machine belt at home

Replacing a Maytag washing machine belt is a straightforward task that can save you money and keep your appliance running smoothly. Here’s a comprehensive guide to help you through the process:

Tools and Materials

• New Maytag washing machine belt
• Screwdriver
• Socket wrench
• Washer belt tool (optional)

Safety Precautions

• Unplug the washing machine from the power outlet.
• Turn off the water supply to the machine.

Step 1: Remove the Back Panel

• Locate the screws holding the back panel in place.
• Use a screwdriver to remove the screws and carefully lift off the back panel.

Step 2: Locate the Belt

• The belt is typically located around the motor pulley and the tub pulley.
• It may be covered by a plastic guard. If so, remove the guard.

Step 3: Remove the Old Belt

• Use a washer belt tool or a screwdriver to pry the old belt off the pulleys.
• Be careful not to damage the pulleys.

Step 4: Install the New Belt

• Place the new belt around the motor pulley and then around the tub pulley.
• Make sure the belt is properly seated in the grooves of the pulleys.

Step 5: Adjust the Belt Tension

• If the belt is too loose, it may slip off the pulleys. If it’s too tight, it may put unnecessary strain on the motor.
• Adjust the tension by tightening or loosening the motor mounting bolts.

Step 6: Reattach the Back Panel

• Once the belt is properly adjusted, reattach the back panel to the washing machine.
• Secure the panel with the screws you removed earlier.

Step 7: Test the Washing Machine

• Plug the washing machine back into the power outlet.
• Turn on the water supply.
• Run a test cycle to ensure that the belt is functioning properly.

Troubleshooting

• If the belt slips off the pulleys, check the belt tension and adjust it accordingly.
• If the belt breaks, replace it with a new one.
• If the motor makes a loud noise after replacing the belt, check the motor mounting bolts for tightness.

The Bottom Line

Replacing a Maytag washing machine belt is a relatively easy task that can be completed in a few simple steps. By following the instructions in this guide, you can save money and keep your washing machine running smoothly for years to come.

Questions You May Have

Q: How often should I replace the belt on my Maytag washing machine?
A: The belt should be replaced every 5-7 years or when it shows signs of wear, such as cracking or fraying.

Q: Can I use a belt from another brand of washing machine?
A: No, it is recommended to use only Maytag-brand belts for Maytag washing machines.

Q: What are the symptoms of a worn-out belt?
A: A worn-out belt may cause the washing machine to make a loud noise, vibrate excessively, or fail to spin properly.