Diy oven faceplate upgrade: how to refresh your kitchen appliance
What To Know
- Disconnect the wires from the faceplate by pressing down on the release tabs and pulling the wires out.
- Align the new faceplate with the oven frame and insert the wires into the corresponding holes.
- Yes, replacing the faceplate on a GE oven is a simple task that can be completed in under an hour.
Replacing the faceplate on your GE oven is a relatively simple task that can be completed in under an hour. By following these step-by-step instructions, you can save yourself the cost of calling a repair technician.
Materials You’ll Need:
- New GE oven faceplate
- Phillips head screwdriver
- Flathead screwdriver (optional)
Safety First:
Before you begin, make sure to unplug your oven from the power outlet. Allow the oven to cool completely before attempting any repairs.
Step 1: Remove the Screws
Locate the screws that secure the faceplate to the oven frame. There are typically two screws on the top of the faceplate and two screws on the bottom. Use a Phillips head screwdriver to remove these screws.
Step 2: Disconnect the Wires
Once the screws are removed, carefully pull the faceplate away from the oven frame. Be careful not to damage the wires that are connected to the faceplate. Disconnect the wires from the faceplate by pressing down on the release tabs and pulling the wires out.
Step 3: Remove the Old Faceplate
Once the wires are disconnected, the old faceplate can be removed. Grip the faceplate firmly and pull it straight towards you. The faceplate should come off easily.
Step 4: Install the New Faceplate
Align the new faceplate with the oven frame and insert the wires into the corresponding holes. Press down on the release tabs to secure the wires.
Step 5: Secure the Faceplate
Place the faceplate over the oven frame and push it into place. The faceplate should fit snugly against the frame. Insert the screws into the holes and tighten them using a Phillips head screwdriver.
Step 6: Reconnect the Power
Once the faceplate is secured, reconnect the oven to the power outlet. Turn on the oven and check to make sure the faceplate is functioning properly.
Troubleshooting:
If you encounter any problems while replacing the faceplate, here are some troubleshooting tips:
- The faceplate doesn’t fit snugly against the oven frame. Make sure that the faceplate is properly aligned with the frame. If necessary, use a flathead screwdriver to gently pry the faceplate into place.
- The wires won’t disconnect from the faceplate. Press down firmly on the release tabs and pull the wires out. If the wires are still stuck, you may need to use a pair of pliers to gently pull them out.
- The oven doesn’t turn on after the faceplate is replaced. Check the wires to make sure they are properly connected. If the wires are loose, the oven may not receive power.
Top Questions Asked
- How often should I replace the faceplate on my GE oven? The faceplate on a GE oven does not typically need to be replaced unless it is damaged or worn.
- Can I replace the faceplate on my GE oven myself? Yes, replacing the faceplate on a GE oven is a simple task that can be completed in under an hour.
- What is the cost of a new GE oven faceplate? The cost of a new GE oven faceplate varies depending on the model of your oven. However, you can expect to pay between $50 and $100 for a new faceplate.
