Electrolux dryer: repair it yourself like a pro! (step-by-step tutorial)
What To Know
- If the cord is damaged, replace it with a new one of the same type and length.
- Remove the old belt and replace it with a new one of the same size and type.
- Replace the old wheel with a new one and secure it with the mounting bolts.
Electrolux dryers are renowned for their efficiency and reliability. However, even the most reliable appliances can experience occasional issues. If your Electrolux dryer has stopped working or is not performing as expected, don’t despair. This comprehensive guide will provide you with step-by-step instructions on how to repair common Electrolux dryer problems.
Troubleshooting Common Electrolux Dryer Issues
Before diving into repairs, it’s crucial to troubleshoot the issue to identify the root cause. Here are some common Electrolux dryer problems and their potential causes:
- Dryer not starting: Faulty power cord, tripped circuit breaker, defective start switch, or broken door switch.
- Dryer not heating: Malfunctioning heating element, faulty thermostat, or clogged lint filter.
- Dryer taking too long to dry: Clogged exhaust vent, dirty condenser coils, or restricted airflow.
- Dryer making excessive noise: Worn belt, loose drum rollers, or damaged blower wheel.
- Dryer overheating: Clogged lint filter, blocked exhaust vent, or faulty temperature sensor.
- Dryer not tumbling: Broken belt, faulty motor, or jammed drum.
- Dryer leaking water: Damaged drain pump or clogged drain hose.
Safety Precautions
Before attempting any repairs, ensure your safety by following these precautions:
- Unplug the dryer from the power outlet.
- Allow the dryer to cool down completely.
- Wear safety glasses and gloves.
- Do not attempt repairs if you are not comfortable or qualified.
Step-by-Step Repair Instructions
Once you have identified the issue, follow these step-by-step instructions to repair your Electrolux dryer:
Repairing a Faulty Power Cord
- Inspect the power cord for any visible damage or breaks.
- If the cord is damaged, replace it with a new one of the same type and length.
Resetting a Tripped Circuit Breaker
- Locate the circuit breaker panel in your home.
- Identify the circuit breaker that corresponds to the dryer outlet.
- Flip the breaker to the “Off” position and then back to “On.”
Replacing a Start Switch
- Remove the front panel of the dryer.
- Locate the start switch, which is usually located near the door latch.
- Disconnect the wires from the switch and remove the old switch.
- Install the new switch by connecting the wires and securing it in place.
Replacing a Door Switch
- Open the dryer door and locate the door switch.
- Disconnect the wires from the switch and unscrew it from the door frame.
- Install the new switch by screwing it in place and connecting the wires.
Replacing a Heating Element
- Unplug the dryer and remove the back panel.
- Disconnect the wires from the heating element and remove the mounting bolts.
- Lift out the old heating element and install the new one.
- Reconnect the wires and mounting bolts, and replace the back panel.
Cleaning Lint Filter and Condenser Coils
- Remove the lint filter and clean it thoroughly.
- Locate the condenser coils, which are usually behind the front panel.
- Use a vacuum cleaner to remove any lint or debris from the coils.
Replacing a Worn Belt
- Remove the back panel of the dryer.
- Locate the belt, which runs around the drum and motor pulley.
- Remove the old belt and replace it with a new one of the same size and type.
- Tension the belt by adjusting the motor pulley.
Replacing a Damaged Blower Wheel
- Remove the back panel of the dryer.
- Locate the blower wheel, which is attached to the motor shaft.
- Remove the mounting bolts and pull out the old blower wheel.
- Replace the old wheel with a new one and secure it with the mounting bolts.
Replacing a Damaged Drain Pump
- Unplug the dryer and remove the front panel.
- Locate the drain pump, which is usually at the bottom of the dryer.
- Disconnect the hoses and electrical connections from the pump.
- Remove the mounting bolts and lift out the old pump.
- Install the new pump by securing it with the mounting bolts and reconnecting the hoses and electrical connections.
Troubleshooting Tips
If you are unable to repair your Electrolux dryer using the instructions provided, here are some additional troubleshooting tips:
- Check the dryer’s user manual for specific troubleshooting advice.
- Consult with an authorized Electrolux repair technician.
- Visit Electrolux’s website for online support and resources.
Key Points: Keeping Your Electrolux Dryer in Top Shape
By following the instructions and troubleshooting tips outlined in this guide, you can effectively repair common Electrolux dryer issues. Remember to perform regular maintenance, such as cleaning the lint filter and condenser coils, to prevent future problems. With proper care and maintenance, your Electrolux dryer will continue to provide reliable and efficient performance for years to come.
What People Want to Know
Q: How often should I clean my Electrolux dryer‘s lint filter?
A: After every use.
Q: What are the signs of a faulty heating element?
A: No heat, longer drying times, and a burning smell.
Q: Can I replace the dryer belt myself?
A: Yes, but it requires some mechanical skills and caution.
Q: What is the most common cause of a dryer not tumbling?
A: A broken belt.
Q: How can I prevent my dryer from overheating?
A: Clean the lint filter regularly and ensure the exhaust vent is clear.
