Fix your lg dryer in minutes: step-by-step reset guide
What To Know
- If your LG dryer is experiencing issues, such as not starting, not drying clothes properly, or displaying error codes, a reset might be the solution.
- A hard reset should be performed for more severe issues or when a soft reset doesn‘t resolve the problem.
- Inspect the lint filter, check for blockages in the exhaust vent, and reset the dryer.
If your LG dryer is experiencing issues, such as not starting, not drying clothes properly, or displaying error codes, a reset might be the solution. Resetting your LG dryer can resolve various problems and restore it to its optimal working condition. This comprehensive guide will provide you with step-by-step instructions on how to reset your LG dryer, troubleshoot common issues, and maintain your dryer for optimal performance.
Types of LG Dryer Resets
LG dryers offer two types of reset options:
- Soft Reset: A soft reset clears the dryer’s temporary memory and settings without erasing any programmed cycles or options.
- Hard Reset: A hard reset restores the dryer to its factory default settings, erasing all programmed cycles, options, and error codes.
How to Perform a Soft Reset
A soft reset is recommended for minor issues and can be performed by following these steps:
1. Unplug the Dryer: Disconnect the dryer from the power outlet.
2. Wait 5 Minutes: Allow the dryer to sit unplugged for at least 5 minutes.
3. Reconnect the Dryer: Plug the dryer back into the power outlet.
4. Test the Dryer: Start a drying cycle to check if the issue has been resolved.
How to Perform a Hard Reset
A hard reset should be performed for more severe issues or when a soft reset doesn‘t resolve the problem.
Note: A hard reset will erase all programmed cycles and options.
1. Unplug the Dryer: Disconnect the dryer from the power outlet.
2. Open the Dryer Door: Open the dryer door and locate the two buttons inside.
3. Press and Hold Buttons: Press and hold both buttons simultaneously for approximately 10 seconds.
4. Wait for the Display: The dryer’s display will show “CL” or “CLR” to indicate the reset is in progress.
5. Reconnect the Dryer: Once the reset is complete, plug the dryer back into the power outlet.
Troubleshooting Common LG Dryer Issues
- Dryer Not Starting: Check the power supply, ensure the door is closed properly, and reset the dryer.
- Dryer Not Drying Clothes: Inspect the lint filter, check for blockages in the exhaust vent, and reset the dryer.
- Dryer Making Noise: Clean the lint filter, check for loose parts, and ensure the dryer is properly leveled.
- Error Codes: Refer to the LG dryer manual for specific error code meanings and troubleshooting steps.
Maintenance Tips for LG Dryers
- Clean the Lint Filter Regularly: Remove lint after each drying cycle to prevent clogging and ensure efficient drying.
- Inspect the Exhaust Vent: Regularly check the exhaust vent for blockages and clean it as needed.
- Level the Dryer: Ensure the dryer is properly leveled to reduce vibration and noise.
- Use the Correct Cycle: Select the appropriate drying cycle based on the type of fabrics being dried.
- Avoid Overloading the Dryer: Do not overload the dryer, as it can restrict airflow and affect drying performance.
Questions You May Have
Q: How often should I reset my LG dryer?
A: Resetting your dryer is not a regular maintenance task. Only reset the dryer if you encounter issues or after performing major repairs.
Q: Will a reset erase my programmed cycles?
A: A hard reset will erase all programmed cycles and options. A soft reset will not affect programmed cycles.
Q: What if the reset doesn‘t resolve the issue?
A: If the reset doesn‘t fix the problem, contact LG customer support or a qualified appliance repair technician for further assistance.
