Unlock your dream kitchen: the essential guide to installing a kitchenaid built-in microwave
What To Know
- Use a level to ensure the microwave is level both front to back and side to side.
- If the microwave is not heating evenly, adjust the turntable by turning the screw located in the center of the turntable.
- The cost of installation will vary depending on the electrician’s rates and the complexity of the installation.
Are you ready to upgrade your kitchen with a sleek and functional KitchenAid built-in microwave? Installing it yourself can be a rewarding experience, saving you time and money. Follow this comprehensive guide to ensure a successful installation.
Tools and Materials Required
- KitchenAid built-in microwave
- Screwdriver
- Level
- Measuring tape
- Pencil
- Jigsaw or circular saw
- Electrical outlet
- Wire nuts
- Electrical tape
Safety Precautions
Before you begin, ensure your safety by following these precautions:
- Disconnect the power to the electrical outlet where the microwave will be installed.
- Wear safety glasses and gloves.
- Read and understand the manufacturer’s installation instructions thoroughly.
Step 1: Preparing the Cabinet
- Remove the existing microwave or cabinet if necessary.
- Measure and mark the cabinet opening according to the manufacturer’s specifications.
- Use a jigsaw or circular saw to cut the opening.
- Sand the edges of the opening smooth.
Step 2: Installing the Electrical Outlet
- If there is no electrical outlet in the cabinet, you will need to install one.
- Connect the electrical wires to the outlet using wire nuts and electrical tape.
- Secure the outlet to the cabinet.
Step 3: Mounting the Microwave
- Position the microwave into the cabinet opening.
- Use a level to ensure the microwave is level both front to back and side to side.
- Secure the microwave to the cabinet using the provided mounting screws.
Step 4: Connecting the Power
- Connect the microwave’s electrical cord to the outlet.
- Ensure the cord is not pinched or damaged.
Step 5: Installing the Trim Kit
- If you purchased a trim kit for your microwave, follow the manufacturer’s instructions to install it.
- The trim kit will cover the gap between the microwave and the cabinet.
Step 6: Testing the Microwave
- Restore power to the electrical outlet.
- Open the microwave door and press the “Start” button.
- The microwave should heat up quickly and evenly.
Step 7: Final Adjustments
- If the microwave is not heating evenly, adjust the turntable by turning the screw located in the center of the turntable.
- Adjust the microwave’s clock and other settings according to your preferences.
Finishing Touches
Congratulations! You have successfully installed your KitchenAid built-in microwave. Enjoy the convenience and sleek design of your new appliance.
Information You Need to Know
1. Can I install a KitchenAid built-in microwave myself?
Yes, with the right tools and materials, you can install a KitchenAid built-in microwave yourself. However, if you are not comfortable working with electricity, it is recommended to hire a qualified electrician.
2. How long does it take to install a KitchenAid built-in microwave?
The installation process typically takes 2-4 hours, depending on the complexity of the installation and your skill level.
3. What is the cost of installing a KitchenAid built-in microwave?
The cost of installation will vary depending on the electrician’s rates and the complexity of the installation. However, you can expect to pay between $100-$300 for professional installation.