Summer comfort made easy: follow these simple steps to install your kelvinator window air conditioner
What To Know
- Installing a window air conditioner can seem like a daunting task, but with the right tools and a step-by-step guide, you can easily complete the installation yourself.
- Use a screwdriver to tighten the screws on the sides of the unit to secure it to the bracket.
- Apply a bead of caulk around the outside of the air conditioner where it meets the window frame.
Kelvinator window air conditioners are known for their efficiency and cooling capabilities, making them a popular choice for many homeowners. Installing a window air conditioner can seem like a daunting task, but with the right tools and a step-by-step guide, you can easily complete the installation yourself. In this comprehensive guide, we will walk you through the entire process of how to install a Kelvinator window air conditioner.
Tools and Materials You’ll Need:
- Kelvinator window air conditioner
- Measuring tape
- Level
- Screwdriver
- Drill (optional)
- Screws
- Foam weatherstripping
- Caulk gun
- Caulk
- Extension cord (optional)
Choosing the Right Window
Before you begin the installation, it’s important to select the right window for your air conditioner. The window should be large enough to accommodate the unit and have enough clearance on all sides. It should also be able to open and close easily.
Measuring and Preparing the Window
- Measure the width and height of the window opening.
- Add 2 inches to the width and 4 inches to the height to determine the size of the mounting bracket.
- Mark the center of the window opening and draw a level line across the width.
- Remove any screens or curtains from the window.
Installing the Mounting Bracket
- Place the mounting bracket on the windowsill and align it with the center mark.
- Use a level to ensure that the bracket is level both horizontally and vertically.
- Drill pilot holes through the bracket and into the window frame.
- Secure the bracket to the window frame using screws.
Installing the Air Conditioner
- Lift the air conditioner onto the mounting bracket.
- Slide the unit back until it locks into place.
- Use a screwdriver to tighten the screws on the sides of the unit to secure it to the bracket.
Sealing the Air Conditioner
- Apply foam weatherstripping around the perimeter of the air conditioner to seal any gaps.
- Apply a bead of caulk around the outside of the air conditioner where it meets the window frame.
- Allow the caulk to dry completely.
Connecting the Power
- If necessary, connect an extension cord to the air conditioner.
- Plug the air conditioner into a grounded electrical outlet.
Testing the Air Conditioner
- Turn on the air conditioner and check if it’s cooling properly.
- Adjust the temperature and fan settings as desired.
Tips for a Successful Installation:
- Make sure the air conditioner is properly sized for the room you’re cooling.
- Position the air conditioner so that it blows cool air directly into the room.
- Clean the air filter regularly to maintain optimal performance.
- Have the air conditioner serviced by a professional every few years to ensure it’s working efficiently.
Troubleshooting Common Problems:
- Air conditioner won’t turn on: Check the power cord and electrical outlet.
- Air conditioner is not cooling: Check the air filter and make sure it’s clean.
- Air conditioner is leaking water: Check the drain hose and make sure it’s not clogged.
- Air conditioner is making a loud noise: Check for any loose parts or debris inside the unit.
Popular Questions
Q: Can I install a Kelvinator window air conditioner in any window?
A: No, the window must be large enough to accommodate the unit and have enough clearance on all sides.
Q: How often should I clean the air filter?
A: The air filter should be cleaned every month or two, or more often if needed.
Q: How can I prevent the air conditioner from leaking water?
A: Check the drain hose regularly and make sure it’s not clogged.
