Electrolux dryer belt trouble? our expert tips for a quick fix

Is your Electrolux dryer leaving your clothes damp or taking an eternity to dry them? The culprit might be a faulty dryer belt. Don’t worry; replacing an Electrolux dryer belt is a relatively easy task that you can tackle yourself with the right tools and instructions.

Tools You’ll Need:

• Screwdriver (Phillips head and flat head)
• Channel-lock pliers
• New dryer belt

Safety Precautions:

• Unplug the dryer from the power outlet before performing any repairs.
• Allow the dryer to cool down completely before handling any components.

Step-by-Step Instructions:

1. Remove the Back Panel

• Use a Phillips head screwdriver to remove the screws holding the back panel in place.
• Carefully lift and remove the back panel.

2. Locate the Belt

• The dryer belt is a long, rubber band that wraps around the drum and the motor pulley.
• It’s typically located near the bottom of the dryer.

3. Remove the Old Belt

• Use a flat head screwdriver to pry the old belt off the motor pulley.
• Be careful not to damage the pulley or the belt.

4. Install the New Belt

• Place the new belt around the motor pulley first.
• Then, stretch the belt over the drum and hook it onto the tensioner pulley.

5. Adjust the Tension

• Use the channel-lock pliers to adjust the tension on the belt.
• The belt should be tight enough to prevent slippage but not so tight that it strains the motor.

6. Reassemble the Dryer

• Replace the back panel and secure it with the screws.
• Plug the dryer back into the power outlet.

7. Test the Dryer

• Run the dryer for a few minutes to ensure that the belt is working properly.
• Listen for any unusual noises or vibrations.

Troubleshooting Tips:

• If the dryer is still not drying properly, the belt may be too loose or too tight. Adjust the tension accordingly.
• If the belt keeps slipping off, the tensioner pulley may be worn or damaged. Replace it as needed.
• If you hear a squealing noise when the dryer is running, the belt may be damaged. Inspect it for cracks or tears and replace it if necessary.

Wrapping It Up: Your Electrolux Dryer, Restored to Glory!

With these step-by-step instructions, you can now confidently tackle the task of replacing your Electrolux dryer belt. Remember, proper maintenance is key to ensuring your dryer operates efficiently and lasts for years to come.

Basics You Wanted To Know

Q: How often should I replace my Electrolux dryer belt?
A: Typically, dryer belts should be replaced every 5-7 years or as recommended by the manufacturer.

Q: Can I use any type of belt for my Electrolux dryer?
A: No, it’s important to use the correct belt specifically designed for your Electrolux dryer model.

Q: What are the symptoms of a faulty dryer belt?
A: Common symptoms include damp clothes after drying, excessive drying time, squealing noises, and belt slippage.