How To Fit A Drawstring Ironing Board Cover In 3 Easy Steps!
What To Know
- In this comprehensive guide, we’ll delve into the art of fitting drawstring ironing board covers, empowering you with the knowledge to achieve a perfect fit every time.
- Can I use a drawstring cover on a non-standard ironing board.
- It is not recommended to use a drawstring cover on a non-standard ironing board, as it may not fit properly and could cause damage.
Ironing doesn’t have to be a chore when you have the right tools. A well-fitted drawstring ironing board cover can make all the difference, providing a smooth and crease-free surface for your garments. In this comprehensive guide, we’ll delve into the art of fitting drawstring ironing board covers, empowering you with the knowledge to achieve a perfect fit every time.
Materials You’ll Need
- Drawstring ironing board cover
- Ironing board
- Scissors
Step-by-Step Instructions
1. Prepare the Ironing Board
Unfold the ironing board and place it on a flat surface. Ensure that the surface is clean and free of any debris.
2. Position the Cover
Align the ironing board cover over the ironing board, ensuring that the drawstring is facing you. The elasticated edge should fit snugly around the edges of the board.
3. Pull the Drawstring
Locate the drawstring and begin pulling it evenly across the width of the board. As you pull, the elasticated edge will tighten, securing the cover in place.
4. Adjust the Fit
Continue pulling the drawstring until the cover is taut and fits snugly over the board. Avoid pulling too tightly, as this can cause the elastic to stretch and lose its effectiveness.
5. Trim the Excess
Once the cover is fitted, trim any excess drawstring using scissors. Leave a small tail of about 2-3 inches for future adjustments.
6. Tie the Drawstring
Tie the ends of the drawstring together securely to prevent the cover from slipping. Double knotting is recommended for extra stability.
7. Check the Fit
Place a garment on the ironing board and iron it. Pay attention to how the cover fits and makes sure it remains secure throughout the ironing process.
Tips for a Perfect Fit
- Use a cover that is specifically designed for your ironing board model.
- Ensure that the cover is completely dry before fitting it.
- If the cover is too loose, tighten the drawstring gradually until it fits snugly.
- If the cover is too tight, loosen the drawstring by untying the knot and pulling the ends slightly.
- Regularly check the fit of the cover and adjust the drawstring as needed.
Benefits of a Well-Fitted Ironing Board Cover
- Smooth Ironing Surface: A well-fitted cover provides a smooth and even surface, reducing creases and making ironing easier.
- Heat Resistance: Drawstring covers are typically made of heat-resistant materials, protecting your ironing board from heat damage.
- Easy to Clean: Drawstring covers can be easily removed and washed, ensuring a clean and hygienic ironing surface.
- Improved Ironing Efficiency: A properly fitted cover allows for effortless gliding of the iron, saving you time and effort.
- Enhanced Safety: A secure fit prevents the cover from slipping or moving during ironing, reducing the risk of burns.
Troubleshooting Common Issues
- Cover Slips During Ironing: Check if the drawstring is tied securely. If necessary, tighten the drawstring or re-tie the knot.
- Creases in the Cover: If the cover has creases, remove it from the ironing board and iron it separately.
- Cover Wears Out Prematurely: Ensure that the cover is washed and dried according to the manufacturer’s instructions. Avoid using harsh detergents or bleach.
- Elastic Loses Elasticity: Over time, the elastic in the drawstring may lose its elasticity. Replace the cover with a new one if the elastic is no longer effective.
In a nutshell: Mastering the Art of Ironing
Fitting a drawstring ironing board cover is a simple yet essential task that can greatly enhance your ironing experience. By following the steps outlined in this guide, you can achieve a perfect fit that provides a smooth, heat-resistant, and easy-to-clean surface. Embrace the ease of drawstring magic and transform your ironing routine into a breeze.
Frequently Asked Questions
Q: How often should I replace my ironing board cover?
A: Replace the cover when it becomes worn, torn, or loses its elasticity. Regular use may require replacement every 6-12 months.
Q: Can I use a drawstring cover on a non-standard ironing board?
A: It is not recommended to use a drawstring cover on a non-standard ironing board, as it may not fit properly and could cause damage.
Q: How should I wash my drawstring ironing board cover?
A: Refer to the manufacturer’s instructions for specific care guidelines. Generally, machine wash in cold water on a gentle cycle and tumble dry on low heat or air dry.
