Unveiled! the secret to effortlessly replacing your samsung dryer element
What To Know
- If your Samsung dryer is not heating properly, it could be a sign that the heating element has burnt out.
- Replacing a Samsung dryer element is a relatively simple repair that can be done in about an hour.
- The cost of a new Samsung dryer heating element varies depending on the model of your dryer.
If your Samsung dryer is not heating properly, it could be a sign that the heating element has burnt out. Replacing a dryer element is a relatively simple repair that can be done in about an hour. In this blog post, we will provide you with a step-by-step guide on how to change Samsung dryer element.
Tools and Materials You’ll Need
Before you start, gather the following tools and materials:
- Screwdriver
- Pliers
- New dryer heating element
- Multimeter (optional)
Safety Precautions
Before you begin working on your dryer, be sure to unplug it from the power outlet. Also, allow the dryer to cool down completely before starting any repairs.
Step-by-Step Guide: How to Change Samsung Dryer Element
1. Unplug the Dryer and Remove the Back Panel
Start by unplugging the dryer from the power outlet. Then, use a screwdriver to remove the screws that hold the back panel in place. Carefully lift off the back panel and set it aside.
2. Locate the Heating Element
The heating element is located at the bottom of the dryer cabinet. It is usually held in place by two screws.
3. Disconnect the Wires from the Heating Element
Use a screwdriver to disconnect the wires from the heating element. Be careful not to damage the wires.
4. Remove the Heating Element
Once the wires are disconnected, you can remove the heating element from the dryer cabinet.
5. Inspect the Heating Element
Inspect the heating element for any damage. If the element is burnt out, it will need to be replaced.
6. Install the New Heating Element
Insert the new heating element into the dryer cabinet. Make sure that the element is properly aligned.
7. Connect the Wires to the Heating Element
Connect the wires to the heating element. Be sure to tighten the screws securely.
8. Reinstall the Back Panel
Reinstall the back panel on the dryer cabinet. Secure the panel with the screws.
9. Plug in the Dryer and Test It
Plug the dryer back into the power outlet. Start the dryer and check if it is heating properly.
Troubleshooting Tips
If your dryer is still not heating properly after replacing the heating element, there may be another problem. Here are a few troubleshooting tips:
- Check the thermal fuse. The thermal fuse is a safety device that prevents the dryer from overheating. If the thermal fuse has blown, it will need to be replaced.
- Check the thermostat. The thermostat controls the temperature of the dryer. If the thermostat is malfunctioning, it will need to be replaced.
- Check the wiring. Make sure that all of the wires are properly connected. Loose or damaged wires can cause the dryer to malfunction.
Summary: Changing Samsung Dryer Element Made Easy
Replacing a Samsung dryer element is a relatively simple repair that can be done in about an hour. By following the steps outlined in this guide, you can save yourself the cost of calling a repair technician.
Frequently Asked Questions
Q: How do I know if my Samsung dryer heating element is burnt out?
A: If your dryer is not heating properly, it could be a sign that the heating element has burnt out. You can test the heating element with a multimeter. If the multimeter reads “0”, the heating element is burnt out.
Q: How much does it cost to replace a Samsung dryer heating element?
A: The cost of a new Samsung dryer heating element varies depending on the model of your dryer. However, you can expect to pay between $50 and $100 for a new heating element.
Q: Can I replace the Samsung dryer heating element myself?
A: Yes, you can replace the Samsung dryer heating element yourself. However, if you are not comfortable working on electrical appliances, you should call a qualified repair technician.
