Step-by-step guide: how to replace a heating element for a frigidaire oven
What To Know
- In this comprehensive guide, we’ll walk you through the steps on how to change a Frigidaire oven heating element safely and effectively.
- Remove the metal panel at the bottom of the oven by unscrewing the screws holding it in place.
- Locate the heating element at the back of the oven cavity.
A malfunctioning oven heating element can leave you with cold meals and a frustrated stomach. However, replacing it doesn’t have to be a daunting task. In this comprehensive guide, we’ll walk you through the steps on how to change a Frigidaire oven heating element safely and effectively.
Safety Precautions
Before you begin, ensure your safety by taking the following precautions:
- Disconnect the oven from the power source.
- Allow the oven to cool completely before starting work.
- Wear gloves and safety glasses to protect yourself from sharp edges and electrical components.
Tools Required
To replace the Frigidaire oven heating element, you’ll need the following tools:
- Screwdriver (Phillips head and flathead)
- Multimeter
- Wire strippers
- Electrical tape
Step-by-Step Instructions
1. Remove the Oven Door
- Open the oven door fully.
- Locate the screws on the hinges connecting the door to the oven frame.
- Remove the screws and carefully lift the door off the oven.
2. Access the Heating Element
- Remove the metal panel at the bottom of the oven by unscrewing the screws holding it in place.
- Locate the heating element at the back of the oven cavity. It consists of two metal coils with electrical terminals.
3. Test the Heating Element
- Use a multimeter to test the heating element. Set the multimeter to the ohms setting.
- Touch the probes to the two terminals of the heating element. A reading of infinity indicates a faulty element.
4. Disconnect the Heating Element
- Turn off the power at the circuit breaker or fuse box.
- Disconnect the wires from the heating element terminals using a screwdriver.
- Note the position of each wire so you can reconnect them correctly later.
5. Remove the Heating Element
- Remove the screws holding the heating element in place.
- Carefully pull the heating element out of the oven cavity.
6. Install the New Heating Element
- Place the new heating element into the oven cavity.
- Secure it with the screws.
- Reconnect the wires to the terminals, ensuring they are in the correct positions.
7. Reassemble the Oven
- Replace the metal panel at the bottom of the oven.
- Reattach the oven door by screwing it onto the hinges.
- Turn on the power at the circuit breaker or fuse box.
Troubleshooting
If the oven does not heat after replacing the heating element, check the following:
- Ensure all electrical connections are secure.
- Inspect the wiring for any damage.
- Check the thermostat or temperature control for proper operation.
Final Thoughts: DIY Oven Repair Success
By following these steps, you can successfully replace a Frigidaire oven heating element and restore your oven to working order. Remember to prioritize safety, use the correct tools, and troubleshoot any issues that may arise. With a little patience and care, you can save yourself the cost of a professional repair and enjoy delicious meals once again.
Frequently Discussed Topics
Q: Can I replace the heating element myself?
A: Yes, it is possible to replace a Frigidaire oven heating element yourself with the right tools and safety precautions.
Q: How often should I replace the heating element?
A: The lifespan of a heating element varies depending on usage. However, it is generally recommended to replace it every 5-7 years.
Q: What are the signs of a faulty heating element?
A: Common signs include uneven heating, slow preheating, or a complete lack of heat in the oven.