Bypass the notorious samsung dryer hc error code: resetting made easy
What To Know
- Clean the element with a vacuum cleaner and check if it has continuity using a multimeter.
- The temperature sensor monitors the dryer’s temperature and sends the information to the control board.
- Resetting the Samsung dryer HC error code is a simple process that can be done in a few minutes.
If you’ve encountered the HC error code on your Samsung dryer, don’t panic. This code indicates a problem with the dryer’s heating element, preventing it from generating heat for drying clothes. Resetting the dryer can often resolve this issue.
How to Reset Samsung Dryer HC Error Code
Method 1: Power Cycle
1. Unplug the dryer from the power outlet.
2. Wait 5 minutes.
3. Plug the dryer back in and turn it on.
Method 2: Reset Button (Some Models)
1. Locate the reset button on the dryer’s control panel.
2. Press and hold the reset button for 5 seconds.
3. The dryer should reset and restart.
Method 3: Service Mode
1. Unplug the dryer from the power outlet.
2. Press and hold the “Start” and “Cancel” buttons simultaneously.
3. While holding the buttons, plug the dryer back in.
4. Release the buttons after 5 seconds.
5. The dryer will enter service mode.
6. Use the arrow buttons to navigate to the “Reset” option.
7. Press the “Start” button to reset the dryer.
Troubleshooting the Samsung Dryer HC Error Code
If resetting the dryer doesn‘t resolve the HC error code, further troubleshooting is necessary.
1. Inspect the Heating Element
Unplug the dryer and remove the back panel to inspect the heating element. Look for any visible damage or loose connections. Clean the element with a vacuum cleaner and check if it has continuity using a multimeter.
2. Check the Thermal Fuse
The thermal fuse is a safety device that prevents the dryer from overheating. If it blows, the dryer will not heat. Locate the thermal fuse and check if it has continuity using a multimeter. If it’s blown, replace it.
3. Test the Temperature Sensor
The temperature sensor monitors the dryer’s temperature and sends the information to the control board. Unplug the dryer and remove the temperature sensor. Check its resistance using a multimeter. If the resistance is out of range, replace the sensor.
4. Inspect the Wiring
Loose or damaged wiring can cause the HC error code. Inspect the wiring harness for any breaks or shorts. Tighten any loose connections and replace any damaged wires.
In a nutshell
Resetting the Samsung dryer HC error code is a simple process that can be done in a few minutes. If the reset doesn’t resolve the issue, further troubleshooting may be necessary. By following the steps outlined above, you can diagnose and repair the problem effectively.
Frequently Asked Questions
Q: Why is my Samsung dryer showing the HC error code?
A: The HC error code indicates a problem with the dryer’s heating element, preventing it from generating heat.
Q: How do I know if my heating element is damaged?
A: Unplug the dryer and remove the back panel to inspect the heating element. Look for any visible damage or loose connections. You can also check its continuity using a multimeter.
Q: What is the thermal fuse and how do I check it?
A: The thermal fuse is a safety device that prevents the dryer from overheating. Locate the thermal fuse and check if it has continuity using a multimeter. If it’s blown, replace it.
Q: How do I test the temperature sensor?
A: Unplug the dryer and remove the temperature sensor. Check its resistance using a multimeter. If the resistance is out of range, replace the sensor.
Q: Can I reset the Samsung dryer HC error code without unplugging it?
A: No, unplugging the dryer is necessary to reset the error code.
