Empowering you with knowledge: a step-by-step tutorial on replacing your whirlpool dryer control board
What To Know
- Once all of the wires and connectors are disconnected, use a Phillips screwdriver to remove the two screws that hold the control board in place.
- Lift the top panel back onto the dryer and align it with the holes in the back of the dryer.
- The cost of replacing a Whirlpool dryer control board will vary depending on the model of your dryer and the cost of the replacement part.
Replacing a Whirlpool dryer control board is a relatively simple task that can be completed in about an hour. By following these step-by-step instructions, you can save yourself the cost of hiring a professional appliance repair technician.
Gather Your Tools and Materials
Before you begin, gather the following tools and materials:
- New Whirlpool dryer control board
- Phillips screwdriver
- Flathead screwdriver
- Torx screwdriver (optional)
- Flashlight
Safety Precautions
Before starting any work on your dryer, be sure to unplug it from the electrical outlet. Also, allow the dryer to cool down completely before beginning any repairs.
Step-by-Step Instructions
1. Remove the Top Panel
Start by removing the two screws that hold the top panel in place. The screws are located at the back of the dryer, near the top. Once the screws are removed, lift the top panel up and off the dryer.
2. Locate the Control Board
The control board is located on the front of the dryer, behind the control panel. It is a rectangular box with several wires and connectors attached to it.
3. Disconnect the Wires and Connectors
Before removing the control board, you need to disconnect all of the wires and connectors that are attached to it. Use a flathead screwdriver to gently pry the connectors off of the terminals. Be careful not to damage the wires or connectors.
4. Remove the Control Board Screws
Once all of the wires and connectors are disconnected, use a Phillips screwdriver to remove the two screws that hold the control board in place. The screws are located at the top and bottom of the control board.
5. Remove the Control Board
Once the screws are removed, carefully lift the control board up and out of the dryer. Be careful not to damage the control board or any of the wires or connectors.
6. Install the New Control Board
Take the new control board and carefully insert it into the dryer. Make sure that the wires and connectors are aligned with the terminals on the control board.
7. Connect the Wires and Connectors
Connect all of the wires and connectors to the terminals on the new control board. Make sure that the wires are securely connected and that the connectors are snapped into place.
8. Install the Control Board Screws
Use a Phillips screwdriver to install the two screws that hold the control board in place. Tighten the screws until they are snug.
9. Reinstall the Top Panel
Lift the top panel back onto the dryer and align it with the holes in the back of the dryer. Install the two screws that hold the top panel in place.
10. Test the Dryer
Plug the dryer back into the electrical outlet and turn it on. Test the dryer to make sure that it is working properly.
Troubleshooting
If you are having trouble replacing the control board on your Whirlpool dryer, here are a few troubleshooting tips:
- Make sure that the new control board is compatible with your dryer model.
- Check all of the wires and connectors to make sure that they are securely connected.
- If the dryer is still not working properly, you may need to call a qualified appliance repair technician.
Additional Tips
- If you are not comfortable replacing the control board yourself, you can call a qualified appliance repair technician to do it for you.
- You can also find helpful videos online that can show you how to replace the control board on your Whirlpool dryer.
- Be sure to keep the old control board in case you need to return it for a refund or exchange.
Top Questions Asked
Q: How do I know if my Whirlpool dryer control board is bad?
A: There are several signs that your Whirlpool dryer control board may be bad, including:
- The dryer will not turn on.
- The dryer will not heat up.
- The dryer will not cycle properly.
- The dryer is making strange noises.
Q: How much does it cost to replace a Whirlpool dryer control board?
A: The cost of replacing a Whirlpool dryer control board will vary depending on the model of your dryer and the cost of the replacement part. However, you can expect to pay between $100 and $200 for the part and labor.
Q: Can I replace a Whirlpool dryer control board myself?
A: Yes, you can replace a Whirlpool dryer control board yourself. However, it is important to be comfortable working with electrical components and to follow the instructions carefully.
