Tired of belt troubles? learn the quickest way to replace your electrolux dryer belt
What To Know
- Changing a belt in an Electrolux dryer may seem daunting, but with the right tools and a bit of patience, it’s a task you can tackle yourself.
- Once the belt is tensioned, carefully lift the back panel back onto the dryer and secure it with the screws.
- If the belt continues to slip or break, it may be necessary to replace the drum or motor pulley.
Introduction:
Changing a belt in an Electrolux dryer may seem daunting, but with the right tools and a bit of patience, it’s a task you can tackle yourself. This comprehensive guide will provide you with step-by-step instructions on how to change the belt in your Electrolux dryer, ensuring your laundry appliance operates smoothly and efficiently.
Tools and Materials You’ll Need:
- New Electrolux dryer belt
- Screwdriver
- Pliers (optional)
Safety Precautions:
Before beginning any repairs, ensure the dryer is unplugged from the power source. Allow sufficient time for the dryer to cool down to prevent burns.
Step 1: Remove the Back Panel
Locate the screws securing the back panel of the dryer. Carefully remove the screws using a screwdriver and gently lift the back panel off the dryer.
Step 2: Locate the Worn Belt
Once the back panel is removed, you will see the worn belt. It is typically a thick rubber band that wraps around the drum and the motor pulley.
Step 3: Remove the Worn Belt
Using your fingers or pliers, carefully slip the worn belt off the drum and motor pulley. Avoid using excessive force to prevent damaging the belt or other components.
Step 4: Install the New Belt
Take the new belt and wrap it around the drum. Ensure that the belt is aligned correctly and is not twisted. Then, slip the belt onto the motor pulley.
Step 5: Tension the Belt
To ensure proper tension, rotate the drum by hand while pulling the belt taut. The belt should be tight enough to prevent slipping but not so tight that it binds the drum.
Step 6: Reinstall the Back Panel
Once the belt is tensioned, carefully lift the back panel back onto the dryer and secure it with the screws. Ensure that the screws are tightened securely.
Step 7: Test the Dryer
Plug the dryer back into the power source and turn it on. Run a short cycle to ensure that the belt is operating correctly and the dryer is functioning properly.
Troubleshooting Tips:
- If the dryer is still not operating correctly after replacing the belt, check for any loose connections or damaged components.
- If the belt continues to slip or break, it may be necessary to replace the drum or motor pulley.
Answers to Your Most Common Questions
Q: How often should I change the belt in my Electrolux dryer?
A: The frequency of belt replacement depends on usage. Generally, it’s recommended to change the belt every 5-7 years or as needed.
Q: Can I use a different brand of belt in my Electrolux dryer?
A: It’s best to use the manufacturer-recommended belt for your Electrolux dryer to ensure proper fit and performance.
Q: What are the signs of a worn dryer belt?
A: Signs include excessive noise, slow drying times, and the dryer stopping mid-cycle.
